topic Re: MF741Cdw Scan to Preset Destination? Remote UI? in Office Printers

MF741Cdw Scan to Preset Destination? Remote UI?

chirano — Tue, 21 Apr 2020 17:20:52 GMT

Running Mac 10.13.6

Attempting to scan directly to computer.

Error message: Could not start application because the neccessary information is not registered. Register information from the Remote UI.

Navigating the Remote UI, I can't find how to register or preset destination. I registered the printer on Canon website today.

Any advice or assistance would be appreciated.

Re: MF741Cdw Scan to Preset Destination? Remote UI?

shadowsports — Wed, 22 Apr 2020 13:49:29 GMT

Greetings,

Instructions for scan to preset destination:

https://oip.manual.canon/USRMA-2122-zz-OP-enGB/contents/SS735_applib_0010.html

Re: MF741Cdw Scan to Preset Destination? Remote UI?

WiseManWhite — Thu, 23 Apr 2020 22:13:53 GMT

I appreciate the link to the instructions, but is there something else required in addition to that? "Scan to Preset Destination" is enabled in my application library. I even tried selecting the "initialize" in the Remote UI application library and nothing was started.

Re: MF741Cdw Scan to Preset Destination? Remote UI?

chirano — Thu, 23 Apr 2020 23:32:21 GMT

Application Library is not visible in my Remote UI portal. How to add?

Re: MF741Cdw Scan to Preset Destination? Remote UI?

WiseManWhite — Fri, 24 Apr 2020 02:52:00 GMT

When you login to Remote UI, make sure you choose the System Manager Mode and not General User Mode. Then it should be on the right side of the screen.

Re: MF741Cdw Scan to Preset Destination? Remote UI?

chirano — Thu, 14 May 2020 22:36:24 GMT

Still no luck. Printer shows error. If I try the Scan button, and select email, it says email/i-fax setting not setup in remote UI.

Re: MF741Cdw Scan to Preset Destination? Remote UI?

WiseManWhite — Tue, 09 Jun 2020 03:11:13 GMT

I'm unable to get mine to work either, even though it is set up in remote U.I.

Re: MF741Cdw Scan to Preset Destination? Remote UI?

Darius — Tue, 09 Jun 2020 19:51:34 GMT

Hi chirano and WiseManWhite.

chirano,

If you're trying to directly scan to the computer, ensure the Scanner Driver & Utilities have been installed on the computer, as well as reinstalling the UFR II /UFR II LT Printer Driver & Utilities. They're available, free of charge, at the following page:

https://www.usa.canon.com/internet/portal/us/home/support/details/printers/color-laser/color-imageclass-mf741cdw/color-imageclass-mf741cdw?subtab=downloads-drivers

You may need to remove and re-register the MF741Cdw in the printers list after the drivers have been installed.

WiseManWhite,

More information on registering a scanning or I-Fax destinations through the Remote UI may be found at the following page in the MF741Cdw's online manual:

https://oip.manual.canon/USRMA-3547-zz-SSM-740-enUS/contents/devu-mcn_mng-rui-reg_desti.html

Note: for direct scanning, the computer will need to have the Canon-produced Printer and Scanner drivers installed; see the link above addressing chirano.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Re: MF741Cdw Scan to Preset Destination? Remote UI?

mrkp89 — Fri, 25 Aug 2023 18:29:59 GMT

This link is broken. How do I set up Scan to Present Destination from the Remote UI?

Re: MF741Cdw Scan to Preset Destination? Remote UI?

cyberwasp — Tue, 29 Aug 2023 18:43:24 GMT

I just used the scan utility app to set the destination to a folder on my PC!

Re: MF741Cdw Scan to Preset Destination? Remote UI?

shadowsports — Tue, 29 Aug 2023 21:17:54 GMT

Greetings,

This is a 3 yr old topic. Its best to start your own thread to receive accurate / up to date information.

Registering Destinations from Remote UI - Canon - imageCLASS MF746Cdw / MF745Cdw / MF743Cdw / MF741Cdw / MF644Cdw / MF642Cdw / MF641Cw - User's Guide (Product Manual)

See the last link under Option 6

Re: MF741Cdw Scan to Preset Destination? Remote UI?

Hector — Fri, 10 Nov 2023 18:54:59 GMT

Hello,

The link was tested and it it looks like it is working. When you try to open the link, do you get any specific errors or messages? Also, what web browser were you using to access the link?

Re: MF741Cdw Scan to Preset Destination? Remote UI?

mrkp89 — Fri, 10 Nov 2023 19:04:23 GMT

The link that was posted recently worked. Thanks for checking.

Re: MF741Cdw Scan to Preset Destination? Remote UI?

shadowsports — Fri, 10 Nov 2023 20:17:34 GMT

Greetings,

Confirmed, my link is working 😀