topic Re: Canon EOS 2000D turnoff display when connect hdmi after 30min in EOS DSLR & Mirrorless Cameras

Canon EOS 2000D turnoff display when connect hdmi after 30min

denis1276 — Sun, 13 Jun 2021 11:11:10 GMT

I have Canon EOS 2000D and i set too camera mode, AF method in Live mode.

I set the canon lens in AF mode and i connect the hdmi cable.

I have disable the auto power off.

I have video output to to my blackmagic mini and the screen on camera is off.

But after 30 min i got a message in hdmi outpout to press camera key.

After doing that i have again video outpout.

It's like camera go to hybernate mode.

How could bypass this limit?

I use camera for liver streaming.

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

Waddizzle — Sun, 13 Jun 2021 12:49:42 GMT

Basically, you cannot bypass that behavior. This is how nearly all DSLRs work.

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

denis1276 — Sun, 13 Jun 2021 13:01:59 GMT

Thank you for answer.

I read this post:

Not exactly sure what you mean, but I've been using this for the last 3 years on my live stream; here is how I do it:

1. Plug in the camera using a capture card
2. Plug in the camera using the provided cable
3. Download EOS Utility and open up Lens Correction **something something**
4. Set it to Manual focus and turn off ALL other UI (This is because it doesn't give "Clean" HDMI out, only way to achieve is to turn off those UI on the camera and AUTO FOCUS)
5. Set your Focus and you're done

from:

https://community.usa.canon.com/t5/EOS/M50-auto-power-s-off-even-when-disabled/m-p/301938/highlight/true#M43866

If i understand...i must change the option from EOS utility and after that wht turn off display stay realy disabled.

Is that correct?

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

Waddizzle — Sun, 13 Jun 2021 13:06:23 GMT

@denis1276 wrote:
Thank you for answer.
I read this post:
"
Not exactly sure what you mean, but I've been using this for the last 3 years on my live stream; here is how I do it:
1. Plug in the camera using a capture card
2. Plug in the camera using the provided cable
3. Download EOS Utility and open up Lens Correction **something something**
4. Set it to Manual focus and turn off ALL other UI (This is because it doesn't give "Clean" HDMI out, only way to achieve is to turn off those UI on the camera and AUTO FOCUS)
5. Set your Focus and you're done
"
from:
https://community.usa.canon.com/t5/EOS/M50-auto-power-s-off-even-when-disabled/m-p/301938/highlight/true#M43866

If i understand...i must change the option from EOS utility and after that wht turn off display stay realy disabled.
Is that correct?

One, that post appears to be referencing a totally different camera design, EOS M50. Two, your DSLR is not a video camera.

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

denis1276 — Sun, 13 Jun 2021 13:09:27 GMT

Ohh... i'm very disapoint.

How could i choose a canon dslr for live streaming?

Whch models?

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

rs-eos — Sun, 13 Jun 2021 15:36:54 GMT

You'd be far better off with dedicated video equipment designed specifically for video.

Canon has three lines of video equipment; all at various price points. Consumer camcorders, professional camcorders and cinema cameras.

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

denis1276 — Sun, 13 Jun 2021 15:51:16 GMT

I want something for live streaming.

What would you suggest?

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

denis1276 — Mon, 14 Jun 2021 20:39:54 GMT

I thought if i could bypass 30 min limit with Canon TC-80N3.

If i set the interleave every ~25min?

The remote control work when hdmi output is enable?

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

kvbarkley — Mon, 14 Jun 2021 20:43:20 GMT

Then it will close the shutter every 25 minutes and turn off the HDMI.

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

denis1276 — Tue, 15 Jun 2021 04:56:24 GMT

When i have connected to hdmi and press the shutter button, iit make auto focus.
Why when i ll connect to TC will turn off the hdmi?
Are you sure for this?

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

Waddizzle — Tue, 15 Jun 2021 16:18:41 GMT

@denis1276 wrote:
When i have connected to hdmi and press the shutter button, iit make auto focus.
Why when i ll connect to TC will turn off the hdmi?
Are you sure for this?

Your camera is [NOT] capable of doing what you wish. That's the bottom line. Please refer to this link for "Clean HDMI" output.

https://support.usa.canon.com/kb/index?page=content&id=ART170224

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

denis1276 — Tue, 15 Jun 2021 13:31:53 GMT

My main question is about to how bypass the turn off limit of 30min.

And now i ask, if i could do this with the TC which press virtual thw shutter button.

I believe if i press a shutter button when i am connecting with hdmi, 2000d dose not turn off.

This virtual press can do it the TC.

Am i right?

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

Waddizzle — Tue, 15 Jun 2021 16:20:07 GMT

@denis1276 wrote:
My main question is about to how bypass the turn off limit of 30min.
And now i ask, if i could do this with the TC which press virtual thw shutter button.
I believe if i press a shutter button when i am connecting with hdmi, 2000d dose not turn off.
This virtual press can do it the TC.
Am i right?

Your camera is [NOT] capable of doing what you wish.

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

denis1276 — Tue, 15 Jun 2021 16:38:01 GMT

i understand that.

I'm trying to find a way to bypass the limit of 30min turn off.

What I am asking is whether the above method will work.

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

Waddizzle — Tue, 15 Jun 2021 16:50:10 GMT

@denis1276 wrote:
i understand that.
I'm trying to find a way to bypass the limit of 30min turn off.
What I am asking is whether the above method will work.

Oh, my bad. I thought you had tried it, and it didn't work. I suggest that you just simply try it, and confirm it for yourself.

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

Waddizzle — Tue, 15 Jun 2021 16:53:46 GMT

@denis1276 wrote:
i understand that.
I'm trying to find a way to bypass the limit of 30min turn off.
What I am asking is whether the above method will work.

The 30 minute time limit is baked into the camera'S firmware. There is no bypassing it. Period. One of the reasons it is there is to prevent the camera from overheating. I am sure you have seen the warnings in the camera's Instruction Manual.

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

denis1276 — Tue, 15 Jun 2021 17:03:54 GMT

I dont read the manual before buy it.

And i dont imagine ever, when i choose from menu to disable auto turn off, that stay enabled with hide value of 30 min.

Although this is for security/health reason, it's too crazy to disable something and tha stay enabled.

Despite thes, i choose this model because is the No1 of sale in my country.

It has perfect image quality for me.

I dysapointing for the aspect ratio of hdmi out, that is not 16:9 but i find way to bypass.

I pay for extra power unit for battery replace.

All of that it cost ~500e.

I dont want to pay extra money for TC timer shooter (it cost in my country ~200e with cable adaptor) and not work for the reason i want.

Sorry for the many questions but i am very tired with this product.

All started from this video:

Camera HACK for Sony/Canon/Nikon 30 Min Video Record Limit! - YouTube

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

rs-eos — Tue, 15 Jun 2021 17:18:45 GMT

It's _always_ best to check out the the user manual before purchasing. Canon's user manuals have been online for many many years.

If you want to record long sessions, it's definitely best to use dedicated video equipment and not rely upon DSLRs which as you've found, often have many video limitations.

Re: Canon EOS 2000D turnoff display when connect hdmi after 30min

denis1276 — Mon, 21 Jun 2021 07:26:13 GMT

Finally i found the solution!!!!!!!!!!

I got a remote shutter and i block the manual shutter button in the half.

I set the shutter/AE lock button from menu to: AE/AF, no AE lock.

The remote shutter did not need, in this way, batteries.

The display view in the button the expose settings, that i crop it in finnaly output to output 16:9.

In this way i bypass the 30' limit to hdmi ouptut.

ps The remote shutter its not the canon official.

I bought it ~30e.