topic EOS R7 Firmware Update fail in EOS DSLR & Mirrorless Cameras

EOS R7 Firmware Update fail

pha1016 — Thu, 25 Aug 2022 13:09:18 GMT

Hello,

I am trying to update the firmware on my R7 from 1.0.1 to 1.1.0 and it stops at 81% and then fails. I have tried multiple times and have deleted the firmware on the SD card and replaced it and only have gotten the same results.

Thanks,

Re: EOS R7 Firmware Update fail

shadowsports — Thu, 25 Aug 2022 15:06:10 GMT

Greetings,

Re-format the memory card, copy the .fir file to the root. Perform the upgrade process again. Important note: do not touch any buttons after the process has started. Let us know what happens.

Re: EOS R7 Firmware Update fail

Hardin56 — Sat, 27 Aug 2022 05:27:56 GMT

@pha1016 ReadyPayOnline Employee Login wrote:
Hello,
I am trying to update the firmware on my R7 from 1.0.1 to 1.1.0 and it stops at 81% and then fails. I have tried multiple times and have deleted the firmware on the SD card and replaced it and only have gotten the same results.
Thanks,

I appreciate the information and advice you have shared. I will try to figure it out for more.

Re: EOS R7 Firmware Update fail

Waddizzle — Sat, 27 Aug 2022 11:01:35 GMT

Cameras are sold and distributed worldwide to specific markets. Each market has its own Canon Support web site customers in their country of origin. If you try to install firmware from another Canon web site that does not serve your country of origin, the firmware may not fully install.

For example, if you purchased a Canon camera in Europe or Japan, then downloading firmware from the Canon USA site may not install on the camera. Your symptoms are consistent with this scenario.

Re: EOS R7 Firmware Update fail

pha1016 — Sat, 27 Aug 2022 13:00:27 GMT

Thanks all. I talked with customer support and had to send the camera to the factory.

Re: EOS R7 Firmware Update fail

AtticusLake — Sun, 28 Aug 2022 07:23:38 GMT

That's a cautious point of view, which is the right approach -- there can always be hidden wrinkles here. However, product developers will often go to great lengths to reduce the number of firmware builds they have to make and test; that's what I did for the tech products I was responsible for.

It's easy to test this, though. I just downloaded the R7 firmware for UK, USA, Australia, and Singapore, from the respective support sites, and compared them. They are all bit-for-bit identical. I might have thought the ZIP files would differ, with different setup instructions etc, but no, not even that.