topic Re: Canon R6 not recording video to multiple cards in EOS DSLR & Mirrorless Cameras

Canon R6 not recording video to multiple cards

ajhuemmer — Fri, 03 Jun 2022 21:32:59 GMT

I have both video and photos set to "record to multiple" in settings. When I shoot photos, it's completely fine and records to both, but when I shoot video, one card is always blank. I've tried with multiple cards. Are there additional settings that have to be changed or is this a bug?

Re: Canon R6 not recording video to multiple cards

Tronhard — Sat, 04 Jun 2022 01:07:27 GMT

Hi AJ:

Welcome to the forum. Sorry to see you are having issues with the recording process. Does your record to card settings screens look like the following? If not, I would check your firmware version, which should be 1.5.2.

And then...

The playback options would be set to card 1 or 2...

Re: Canon R6 not recording video to multiple cards

Waddizzle — Fri, 03 Jun 2022 22:50:19 GMT

What recording mode or format are you using? Some modes may not record to both cards.

Re: Canon R6 not recording video to multiple cards

Waddizzle — Fri, 03 Jun 2022 23:14:00 GMT

The R6 does not have that last option.

Re: Canon R6 not recording video to multiple cards

Tronhard — Sat, 04 Jun 2022 00:33:39 GMT

The photos in my post are directly off my R6 display. This feature was updated on firmware 1.4.0, and my camera is updated to version 1.5.2, which is the current version as of this date.

If you refer to the EOS R6 User guide that is updated to firmware 1.5.0, on P699, you will see the same images as I posted.

Re: Canon R6 not recording video to multiple cards

Hazel_T — Sat, 04 Jun 2022 05:54:32 GMT

Hi ajhuemmer,

The main things for recording video to multiple cards on the EOS R6 the main things would be to make sure the recording options are set like in Tronhard's original post and to make sure your firmware is up to date.

Beyond that there aren't any other settings to enable the record to multiple. One thing to check would be to lower the resolution and if you are using something like Canon Log or High Frame rate try turning those off. If one of the cards is not writing the file fast enough it could cause something like this to happen.