topic Re: Issue:I cannot connect camera connect with more than two cameras at the same time... Is it possi in EOS DSLR & Mirrorless Cameras

Issue:I cannot connect camera connect with more than two cameras at the same time... Is it possible?

Confused99999 — Mon, 27 Dec 2021 05:02:15 GMT

I have an M50 and a T6.

I have ostensibly connected the M50 to my cell phone. It worked.

I then tried to connect my T6 to my cell phone, this where I ran into problems.

I was unable to connect the T6. Camera connect kept referring to the M50 connection I already had.

I wanted to have both cameras connected so if I wanted to use one rather than the other, I could do so.

But it did not work.

I may be wrong but I think that I have to clear one camera to connect the other. I haven't tried that yet because I did not want to disconnect the M50.

Does anybody know or understand this...

Re: Issue:I cannot connect camera connect with more than two cameras at the same time... Is it possi

stevet1 — Mon, 27 Dec 2021 16:29:37 GMT

Confused9999.

I might be wrong, but I think you have to clear the settings for your M50 before you can connect your T6.

You might have to uninstall the Camera Connect app on your phone and then re-install it, but I'm no expert and don't take mine as the final word.

Steve Thomas

Re: Issue:I cannot connect camera connect with more than two cameras at the same time... Is it possi

Waddizzle — Mon, 27 Dec 2021 16:58:03 GMT

If you are trying to make concurrent connections to more than one camera at the same time, that is not supported.

Re: Issue:I cannot connect camera connect with more than two cameras at the same time... Is it possi

Confused99999 — Mon, 27 Dec 2021 20:27:30 GMT

Thank you. I was sort of leaning towards that solution.

So, in order to connect my T6 to my cell phone; I must first clear all the connection of the m50, then start the process all over again to connect the T6.

Is that correct?

Thanks again for your response.

Re: Issue:I cannot connect camera connect with more than two cameras at the same time... Is it possi

Confused99999 — Mon, 27 Dec 2021 20:31:28 GMT

Thanks.

I hope that I do not have to uninstall camera connect then reinstall it again to do the t6 connect.

Being lazy I'll try to clear the m50 connection then try to reconnect the t6. If it works OK, if not I'll try the uninstall route.

We'll see.

Re: Issue:I cannot connect camera connect with more than two cameras at the same time... Is it possi

Waddizzle — Tue, 28 Dec 2021 12:52:24 GMT

Every camera has a unique hardware address. If you wish to connect to a different camera, then you must establish a new connection configuration. It does not necessarily mean that you must delete previous connection configurations.