topic Re: Preview screen (remote trigger) in EOS DSLR & Mirrorless Cameras

Preview screen (remote trigger)

wildwoodphoto — Thu, 25 Feb 2021 13:38:40 GMT

I’m using a remote trigger via the shutter release port. After image capture, the LCD screen only shows the horizon level indicator, but no preview of the taken image. The only way I can see the image I’ve taken is to unplug the cable to the remote trigger. How can I see the image preview without having to do this after every capture? I'm using an EOS 5D MkIV.

Re: Preview screen (remote trigger)

rs-eos — Thu, 25 Feb 2021 14:18:53 GMT

Just tried this with my 5D IV with the RS-80N3 and couldn't reproduce the issue.

Capuring an image via the remote always put up the capture briefely on the LCD screen. I then pressed INFO until the level was displayed. Took an image via the remote and it briefly showed on the LCD. Then the level showed again. Pressed INFO one more time to return to the Quick settings display. Third image captured, showed briefly on the LCD screen.

Having said all that, I was in Manual mode, and shutter set to 1/200 (i.e. something other than Bulb).

Re: Preview screen (remote trigger)

kvbarkley — Thu, 25 Feb 2021 14:33:16 GMT

What is your review time set to?

Re: Preview screen (remote trigger)

wildwoodphoto — Thu, 25 Feb 2021 14:40:39 GMT

8 seconds.

Re: Preview screen (remote trigger)

wildwoodphoto — Thu, 25 Feb 2021 15:07:23 GMT

As soon as I attach the remote cable to the receiver, the LCD screen shows the level indicator, and all buttons on the left are disabled.

Im not using the RS-80N3 cable release. I'm using a Vello Freewave wireless trigger.

Re: Preview screen (remote trigger)

kvbarkley — Thu, 25 Feb 2021 15:08:48 GMT

Which remote trigger?

ETA:

Posts crossed in the Ether.

Do you have a model number?

Re: Preview screen (remote trigger)

wildwoodphoto — Thu, 25 Feb 2021 15:11:15 GMT

Vello Freewave Flash Trigger LR (RFWLR)

Re: Preview screen (remote trigger)

kvbarkley — Thu, 25 Feb 2021 15:33:30 GMT

I seee nothing in the manual about using this to trigger the shutter. It looks to me that the 3.5mm port on the Vello is labeled "flash out", which is not what you want at all.

Re: Preview screen (remote trigger)

wildwoodphoto — Thu, 25 Feb 2021 15:39:22 GMT

Can you clarify what 'flash out' means and why this isn't what I need? What do I need? :O)

Re: Preview screen (remote trigger)

kvbarkley — Thu, 25 Feb 2021 15:41:52 GMT

Flash out is to trigger a flash, not the camera.

You need a remote shutter trigger, not a flash trigger. I hope you have not damaged your camera.

Re: Preview screen (remote trigger)

wildwoodphoto — Thu, 25 Feb 2021 15:44:28 GMT

Camera is fine fortunately. Thaks for your help.

Re: Preview screen (remote trigger)

kvbarkley — Thu, 25 Feb 2021 15:56:57 GMT

You won't know whether anything is damaged until you plug in a real remote shutter release.

Re: Preview screen (remote trigger)

wildwoodphoto — Thu, 25 Feb 2021 16:17:05 GMT

Just plugged in the RS-80N3 and all works OK