topic Re: Beep in 1DX mkii in EOS DSLR & Mirrorless Cameras

Beep in 1DX mkii

Malco — Wed, 31 Jan 2018 05:42:26 GMT

Not a big problem, but the beep doesn't work in my 1DX Mk ii

I have the beep enabled and drive is set to one shot.

I just got the camera and I updated to the latest firmware.

Mal

Re: Beep in 1DX mkii

diverhank — Wed, 31 Jan 2018 06:16:19 GMT

You might want to make sure the option is set for each of the modes you will use...they are independently remembered for each mode (e.g. Av would have a different set than Tv, or M, etc.).

Re: Beep in 1DX mkii

Malco — Wed, 31 Jan 2018 06:44:30 GMT

I checked it out the beep is set to on. The camera focuses properly , the green light comes on and the AF in the lower right cornor is on, but no beep.

Re: Beep in 1DX mkii

wq9nsc — Wed, 31 Jan 2018 12:54:53 GMT

I just got my 1DXM2 also and it came with firmware V 1.13 which I haven't upgraded to 1.14 yet. I checked and the beep does work on mine but I turned it back off because I don't like the camera beeping at me.

Maybe someone else who has upgraded the firmware to 1.14 can comment whether this is a glitch with that version. I downloaded the 1.14 update to my PCand will probabably install it after shooting a soccer game tomorrow night however if it has "glitches" then I will hold off until 1.15. My only issue with the camera is connect time is a little slow using the gigabit LAN connector but that may not be just the camera issue; it takes up to about 45 seconds to connect after the LAN connection is enabled but then file transfer is very fast.

Re: Beep in 1DX mkii

coachboz68 — Wed, 31 Jan 2018 20:32:03 GMT

@wq9nsc wrote:

Maybe someone else who has upgraded the firmware to 1.14 can comment whether this is a glitch with that version. I downloaded the 1.14 update to my PCand will probabably install it after shooting a soccer game tomorrow night however if it has "glitches" then I will hold off until 1.15. My only issue with the camera is connect time is a little slow using the gigabit LAN connector but that may not be just the camera issue; it takes up to about 45 seconds to connect after the LAN connection is enabled but then file transfer is very fast.

I upgraded my firmware to 1.14 and the beep still works fine. I turned it off for a while, then turned it back on, and it is working as designed. For me, when "little" things like that seem to be a problem on a $5400 purchase, I tend to want to get it looked at immediately as I worry about other things that may be wrong as well. I'd have Canon look at it.

Re: Beep in 1DX mkii

Malco — Wed, 31 Jan 2018 20:47:54 GMT

I e-mailed Canon I will wait and see what they say.