topic Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone. in EOS DSLR & Mirrorless Cameras

FREAKING OUT! Photos lost. Firmware not supported and all images gone.

cshipley678 — Thu, 08 Apr 2021 16:30:11 GMT

Hi. I bought a new lens. Put the baby on and went to work. when turning on my camera, got the message "Attached lens may not work properly because it is not supported by the camera firware." I have a canon eos r and I put my 50mm 1.8 on it. I hit ok button and did a whole photo shoot, looked at pics everything was fine. Finished shoot, turned off camera, came home to upload and NO PHOTOS at all on my card. Can I save this? ugh. I'm not even a rookie at this. So dissapointed in myself. Hoping the image sare still there somewhere on card. Any advice?

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

rs-eos — Thu, 08 Apr 2021 16:44:36 GMT

Which 50mm f/1.8 do you have. The EF or RF version? I'm assuming it's the EF version and that you're using an adapter? If so, which specific adapter are you using?

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

jrhoffman75 — Thu, 08 Apr 2021 17:58:32 GMT

@cshipley678 wrote:
Hi. I bought a new lens. Put the baby on and went to work. when turning on my camera, got the message "Attached lens may not work properly because it is not supported by the camera firware." I have a canon eos r and I put my 50mm 1.8 on it. I hit ok button and did a whole photo shoot, looked at pics everything was fine. Finished shoot, turned off camera, came home to upload and NO PHOTOS at all on my card. Can I save this? ugh. I'm not even a rookie at this. So dissapointed in myself. Hoping the image sare still there somewhere on card. Any advice?

It looks like the only firmware updaet that involves a 50mm lens is 1.8; it says:

1. Improves color balance when the RF50mm F1.8 STM lens is attached to the EOS R camera.

Nothing to do with actually supporting use of gthe lens.

How do you know there are no photos on the card? Did you remove card from camera and insert into a card reader?

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

cshipley678 — Thu, 08 Apr 2021 17:58:01 GMT

I actually have the RF lens.

No adapter

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

cshipley678 — Thu, 08 Apr 2021 17:59:09 GMT

I took it out of Camera, put in a card reader and tried to upload to lightroom, no photos. Took it out and put in my camera, No photos 😞 Trying to recover them but no such luck so far.

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

jrhoffman75 — Thu, 08 Apr 2021 18:02:42 GMT

You said you looked at pics on the camera - how?

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

Peter — Thu, 08 Apr 2021 18:16:25 GMT

It may be that the pictures you saw on the camera display just were saved to RAM and not the card. That would explain why they disappeard after a restart. With that said you can always try Recuva or Photorec to scan the card for lost photos.

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

jrhoffman75 — Thu, 08 Apr 2021 19:32:36 GMT

I’m assuming this isn’t a new camera to you? I.e. the card isn't locked and you disabled take photos without card?

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

cshipley678 — Thu, 08 Apr 2021 20:05:49 GMT

yes. I removed it from my camera and tried to upload to lightroom, no photos, then, put it back in my camera, no photos. I'm trying recovery but no such luck as of yet.

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

cshipley678 — Thu, 08 Apr 2021 20:07:07 GMT

I looked at them as I was shooting (playback) yesterday..... I never turned my camera off until the end. Then when trying to upload to my reader, no photos. and then I put it back in my camera and still no photos.

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

cshipley678 — Thu, 08 Apr 2021 20:09:14 GMT

How the heck does that happen? All of the pics? I was scrolling through them all during shoot. I'm not sure what would have changed on my camera to have that happen. Can they be recoverd from RAM?

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

rs-eos — Thu, 08 Apr 2021 20:20:56 GMT

RAM is working memory and when devices are turned off, since there's no power to those circuits, all data in RAM is thus lost.

What SD card (brand, size, etc.) are you using. It may very well have become corrupted.

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

cshipley678 — Thu, 08 Apr 2021 20:21:22 GMT

Yes, not new. It looks like after a scan on Zar i have multiple bad sectors.but, also data. Trying to figure out how to recover that as of now and if I even can. I appreciate all of your help!!

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

cshipley678 — Thu, 08 Apr 2021 20:22:42 GMT

I just did a scan on Zar. looks like I have some bad sectors and some data. Trying to figure out how to recover this if at all. Thank you for all your input 🙂

Re: FREAKING OUT! Photos lost. Firmware not supported and all images gone.

cshipley678 — Thu, 08 Apr 2021 20:23:22 GMT

it is sanDisk extreme pro 64gb 170 mb