topic Re: 40D Firmware Update 1.1.1 in EOS DSLR & Mirrorless Cameras

40D Firmware Update 1.1.1

Greeblen — Sun, 15 Nov 2020 06:03:18 GMT

Hi there,

Apparently Canon has scrubbed firmware update files from their websites for products that are no longer supported.

I am trying to find "eos40d111.exe"

does anyone here have it?

Thanks!

Re: 40D Firmware Update 1.1.1

Peter — Sun, 15 Nov 2020 06:51:12 GMT

You have PM.

Re: 40D Firmware Update 1.1.1

MikeSowsun — Sun, 15 Nov 2020 13:38:57 GMT

I wouldn't try upgrading the firmware if your camera is not working properly. Firmware doesn't fix a broken camera, and if you try, you could make things worse.

I would only do it as a last resort if I was prepared to junk the camera rather than fix it.

Re: 40D Firmware Update 1.1.1

ebiggs1 — Sun, 15 Nov 2020 16:52:56 GMT

" Firmware doesn't fix a broken camera,..."

I don't know why people see FW re-installation as a camera fix. Most of the time people don't even know a camera has FW until somebody says so. That person probably doesn't understand the purpose of upgrading FW. A lot of the time a new FW only adds a new language. Something most of us don't need. Sometimes it adds a new lens but if you don't have that lens nor intend to buy one it also dosen't help you. You really need to read exactly what the updated FW does.

Like said, one thing it doesn't do is repair a broken camera. If you think that is the direction you need to go a total reset to factory default is the best option.

Re: 40D Firmware Update 1.1.1

Greeblen — Sun, 15 Nov 2020 17:20:07 GMT

A proper Firmware update can indeed fix a lot of issues for lots of different products that rely on computerized components, depending on what is in the update. I couldn't tell you how many times I have resurrected a motherboard, laptop, docking station, (and even cameras) with the right firmware update.

A total reset to factory default was the first thing I tried and this did not solve the issue I was having. In my research, I have heard multiple mentions that the autofocus problem I am experiencing was fairly common and was hoping that the firmware updates that had been released after the camera launched may have addressed this issue. The challenge was finding the actual update file because Canon in it's infinite wisdom decided that they would remove it from their website years after it was released becuase that model wasn't supported anymore.

Basically, what I have right now is a DSLR that works more like an old film camera in that I will have to always use manual focus, which isn't what I'm looking for in a DSLR. I'm trying everything I can to fix this before investing in a new camera.

Re: 40D Firmware Update 1.1.1

ebiggs1 — Sun, 15 Nov 2020 17:53:47 GMT

I pretty much disagree with your feelings but you need to do what you see as best. Just make sure you read what the FW update does. I guarantee it will not fix a broken camera. Plus if done incorrectly because the camera is faulty, the new FW can brick the camera. Then only Canon can revive it.

You are correct that some FW updates have bug swats in them. So if that is the problem you are having, all won't have the problem, you need the update. And that is exactly what and why there is FW updates. Again, just make sure you read what the FW update does. Because if your issue is not addressed in it, it won't fix your camera's problem.

Re: 40D Firmware Update 1.1.1

MikeSowsun — Sun, 15 Nov 2020 18:00:27 GMT

The 40D 1.1.1 firmware has nothing that will fix your AF problem.

http://www.bobatkins.com/photography/digital/eos_40D_firmware_update_1-1-1.html

Firmware update Version 1.1.1 incorporates the following fixes and improvements.

Fixes a malfunction that in rare occurrence causes a low battery indication to be displayed when using the EF 85mm F1.2L II USM lens. Depending on the battery check timing of the camera, the battery level displayed on the camera's LCD data panel may shows Battery will be exhausted soon or Battery must be recharged, even though the battery capacity is sufficient.
Fixes a malfunction that in rare occurrence causes an Err 06 Self Cleaning Sensor malfunction to appear on the camera's LCD monitor and LCD data panel, even when the Self Cleaning Sensor Unit is operating normally. This message may appear depending on the timing of when the camera is switch to the ON position.
Fixes a malfunction that prevents correct colors from being printed when direct printing. RAW images captured using the camera's custom Picture Styles (Emerald, etc.), which have been downloaded from Canon's Web site and registered under User Def. 2 or User Def. 3.
Modifies the level of subject brightness that causes the AF-assist beam to fire when using an external Speedlite.
Enables an external flash connected to the camera's synchro terminal to fire even when the camera's built-in flash is popped up.

Re: 40D Firmware Update 1.1.1

NetDoc — Sat, 09 Jan 2021 16:33:40 GMT

Peter, could you PM me as well? I have the same problem. I am using my old 40D for astrophotography and can't format a 128GB card. Apparently "updated" firmware will fix this.

Re: 40D Firmware Update 1.1.1

Peter — Sat, 09 Jan 2021 17:11:37 GMT

PM sent.

Re: 40D Firmware Update 1.1.1

MikeSowsun — Sat, 09 Jan 2021 17:20:20 GMT

Here is a website that maintains old Canon firmware for Magic Lantern users: https://pel.hu/eoscard/

Just scroll down to find the camera and firmware you need. Download the ziped file and then run it to extract the "fir" file.

Re: 40D Firmware Update 1.1.1

Louisvicary — Wed, 24 Feb 2021 18:07:27 GMT

Hello I'm unable to find the update any where and just bought a canon 40d it's firmware is 1.0.3 so quite old. Please can some one email me the update! I'd be extremely grateful! Hopefully someone responds!

My email: (removed personal information)

Re: 40D Firmware Update 1.1.1

Peter — Thu, 25 Feb 2021 05:40:59 GMT

Take a look at the comment at page 1.

Re: 40D Firmware Update 1.1.1

rednaz07 — Thu, 11 Mar 2021 15:27:20 GMT

Hi Peter!

I'm attempting to update my parents old Canon 40D and was wondering if you could possibly send me the firmware update you sent many years ago to others in this chat? Thank you!

I'm working on a MacBook Pro 2020 by the way

Re: 40D Firmware Update 1.1.1

MikeSowsun — Thu, 11 Mar 2021 15:48:24 GMT

@rednaz07 wrote:
Hi Peter!

I'm attempting to update my parents old Canon 40D and was wondering if you could possibly send me the firmware update you sent many years ago to others in this chat? Thank you!

I'm working on a MacBook Pro 2020 by the way

You can download older 40D firmware here: https://pel.hu/eoscard/

EOS 40D

1.0.8 eos40d108.exe
1.1.1 eos40d111.exe

Re: 40D Firmware Update 1.1.1

rednaz07 — Thu, 11 Mar 2021 16:10:52 GMT

Thank you!

Re: 40D Firmware Update 1.1.1

Anths — Tue, 12 Oct 2021 17:49:23 GMT

Well I need to. try but thank you anyway..

Anthony

Re: 40D Firmware Update 1.1.1

Anths — Tue, 12 Oct 2021 17:50:34 GMT

I don't Junk Stuff if it doesn'tr work I will strip it and sell parts

Re: 40D Firmware Update 1.1.1

Anths — Tue, 12 Oct 2021 17:51:23 GMT

Tgank you very much