topic Re: shutter not woking in EOS DSLR & Mirrorless Cameras

shutter not woking

marton — Sun, 30 Nov 2014 06:03:56 GMT

I have a three year old T3. Wonderful camera. Has been trouble free. I use it for work. went tgo take photos today. On usual full auto. flash attachment on. Camera poweres on. Look through viewfinder. All numbers are there. press shmutter. no sound. LED screen goes black then goes back to view. shutter is not functuoningTries different sd cards. Still no pictures. Any help is greatly appreciated.

Re: shutter not woking

ebiggs1 — Sun, 30 Nov 2014 15:35:30 GMT

That don't sound good. I am going to assume you didn't damage the cmera in any way before this?

No, OK, reset the camera to defaults. Make sure you have a known good fully charged battery. A brand new SD card formatted by this camera. And a different lenses. Give it a go. You need to do these simple steps before you call Canon Support for a repair request.

Re: shutter not woking

cicopo — Sun, 30 Nov 2014 18:49:14 GMT

Another idea would be to put the camera into Sensor Clean mode & observe whether the mirror flips up & the shutter opens.

Re: shutter not woking

marton — Mon, 01 Dec 2014 18:28:03 GMT

It was the lens. The 18-55 motor was stuck. Changed the lens and it worked fine. Twisted the outer ring and it worked. Thanks.

Re: shutter not woking

marton — Mon, 01 Dec 2014 18:26:54 GMT

It was the lens motor. How do you access snsor clean mode? Thank you.

Re: shutter not woking

ebiggs1 — Mon, 01 Dec 2014 20:02:40 GMT

It is in the Menus but I would strongly suggest you do not do this. You really need to have someone that knows exactly how to show how first. There are some things inside the mirror box that don't respond well to misuse.

Re: shutter not woking

cicopo — Mon, 01 Dec 2014 21:28:24 GMT

I wasn't suggesting he / she clean the sensor; just watch to see if the mirror flipped up & the shutter opened. All you are doing is watching that cycle of things & then when you turn the camera off the shutter closes & the mirror drops back to it's normal position.