topic Re: 80d - Mode dial not selecting correct mode in EOS DSLR & Mirrorless Cameras

80d - Mode dial not selecting correct mode

reynsteph — Sun, 26 Jan 2020 05:44:03 GMT

Hi all,

I am hoping somebody can help me with an issue I am having with a recently purchased new-to-me Canon 80d camera (purchased from B&H Photo).

When I turn the mode dial to select my desired mode, the display screen does not show what has been selected on the mode dial. Below is a list of what is selected on the mode dial and then the selection displayed.

B -> B

M -> B

Av -> Tv

Tv -> Tv

P -> P

A+ -> P

Flash Off -> P

CA-> P

SCN -> C1 p

Creative filters -> C2 p

C2 -> C2 p

C1 -> C1 p

Has anybody else experienced this problem? Is there a setting that I have not implemented?

I have tried using a brand new SanDisk SD card and updating the firmware on the camera.

Re: 80d - Mode dial not selecting correct mode

shadowsports — Sun, 26 Jan 2020 06:20:11 GMT

Greetings,

I recommend resetting the camera to defaults and retesting.

If the behavior persists, contact B&H to set up a return.

Re: 80d - Mode dial not selecting correct mode

reynsteph — Sun, 26 Jan 2020 15:45:25 GMT

Thank you for responding. I changed the settings to default and was still having the issue, so I am returning.

Thanks again.

Re: 80d - Mode dial not selecting correct mode

ebiggs1 — Sun, 26 Jan 2020 16:41:48 GMT

"I recommend resetting the camera to defaults and retesting."

Hold on there fella! How did you reset the defaults? Menus, tools, clear all setting AND clear all custom settings. <-- that is the important one, not the first one. WHat you are seeing looks more like a custom set up not factory default.

Re: 80d - Mode dial not selecting correct mode

shadowsports — Sun, 26 Jan 2020 16:59:59 GMT

Nice Ernie!

Did not know there was a second reset for Custom Settings. Helpful for sure.

Re: 80d - Mode dial not selecting correct mode

reynsteph — Sun, 26 Jan 2020 17:29:52 GMT

Thanks ebiggs1! I tried clearing both of those settings but the problem persisted.

Re: 80d - Mode dial not selecting correct mode

wq9nsc — Sun, 26 Jan 2020 17:56:13 GMT

I think this is going to be a problem for Canon to solve and the only additional thing that you might try is to leave the battery out for several minutes, then turn the power switch on (with the battery still removed) and cycle the mode dial. Then put the power switch back to off, insert the battery, and try again.

But it sounds like either the encoder switch of the mode dial is defective or the decoder IC that interfaces it to the main camera control system has become defective. You stated the camera was "new to you", if this is a used camera within the B&H return period then I would return it.

Rodger

Re: 80d - Mode dial not selecting correct mode

ebiggs1 — Sun, 26 Jan 2020 19:49:39 GMT

Cameras that do not have a separate keep alive battery, that you can remove, don't benefit form that procedure. I am afraid this is a Canon problem but B&H will take it back. I am surprised B&H didn't catch it first off.

Re: 80d - Mode dial not selecting correct mode

Sreehariks29 — Fri, 16 Apr 2021 13:35:07 GMT

I am also facing same issue.. How did you solve this?

Re: 80d - Mode dial not selecting correct mode

reynsteph — Fri, 16 Apr 2021 13:56:26 GMT

Unfortunately I did not fix the issue. I was able to return the camera to B&H and purchased a different used 80d from them that has been working great.

Re: 80d - Mode dial not selecting correct mode

Sreehariks29 — Sat, 17 Apr 2021 16:53:06 GMT

Just to confirm does this issue started for you after connecting to a mobile through WiFi?

Re: 80d - Mode dial not selecting correct mode

Sreehariks29 — Fri, 21 May 2021 12:24:05 GMT

The issue is fixed after cleaning by service center, hope this will be helpful for people with same issue.