topic I cannot use my canon SL1 to trigger my wireless studio strobes...my 5diii works fine?? in EOS DSLR & Mirrorless Cameras

I cannot use my canon SL1 to trigger my wireless studio strobes...my 5diii works fine??

jimboya — Tue, 15 Apr 2014 01:15:16 GMT

I use the yongnuo wireless triggers and receivers for my studio strobe monolights. My 5diii works fine, however, my wife's Rebel SL1 wiill not trigger them.

What do I have to do to make them work?

Jim

Re: I cannot use my canon SL1 to trigger my wireless studio strobes...my 5diii works fine??

MikeSowsun — Tue, 15 Apr 2014 01:35:28 GMT

Which triggers are you using?

I have Yongnuo YN-622C's and use them on both my SL1 and 5D Mk III with no problems at all. The Flash Menu looks almost identical on both cameras so I would take a look at the flash menu items to see if they are set up the same.

The only thing I can think of off-hand is that you might have "Flash Firing" set to "Disable".

Re: I cannot use my canon SL1 to trigger my wireless studio strobes...my 5diii works fine??

jimboya — Tue, 15 Apr 2014 01:42:30 GMT

Hi Mike, thanks for the reply...they are the Yongnuo 602 series. I checked to "Flash firing" and it is enabled. The mystery continues.

Re: I cannot use my canon SL1 to trigger my wireless studio strobes...my 5diii works fine??

Skirball — Wed, 16 Apr 2014 16:18:41 GMT

Put a flash on the SL1 and verify the hotshoe works.

There's no reason why the 602s wouldn't work on it. They're a fully manual trigger, in other words, very simple. So long as it makes contact with the center lead it should work fine.