topic Re: Why do I need to press the shutter twice? in EOS DSLR & Mirrorless Cameras

Why do I need to press the shutter twice?

Arbutus — Wed, 26 Aug 2015 20:25:31 GMT

In any non-auto mode (P/T/A/M) i need to press the shetter button twice - one seems to raise the mirror, judging by the noise; the second press takes the picture correctly at the speed&aperture set. But clearly this is not right.

In any of the auto modes - A+ etc, one press takes the picture.

I have reset the camera (T4i) to factory default settings.

I use only Canon lenses. AF or MF mode makes no difference. All lenses cause the same symptoms.

Is there a setting I am missing here?

Any help very much appreciated!!!!

Re: Why do I need to press the shutter twice?

TTMartin — Wed, 26 Aug 2015 20:41:45 GMT

Sounds like you have mirror lock up turned on.

There are two places to reset the cameras settings.

One is clear custom functions and the second is clear camera settings.

Be sure you have fully reset your camera to its defaults.

Re: Why do I need to press the shutter twice?

Arbutus — Wed, 26 Aug 2015 20:53:51 GMT

Ahhh ! I knew there was a setting somewhare. It is under Wrench4:Custom Functions Page5 MIRROR LOCKUP

Thank you !!!!