topic Re: 1D Mark 2 in EOS DSLR & Mirrorless Cameras

1D Mark 2

Krisdl16 — Sat, 29 Jul 2017 17:00:18 GMT

Hey guys quick question!

My canon for some reason won’t turn on!
The batteries are fully charged but no luck.

Any ideas?

Re: 1D Mark 2

TTMartin — Sat, 29 Jul 2017 20:12:47 GMT

@Krisdl16 wrote:
Hey guys quick question!

My canon for some reason won’t turn on!
The batteries are fully charged but no luck.

Any ideas?

Double check that the card door is fully closed.

Re: 1D Mark 2

Krisdl16 — Sat, 29 Jul 2017 22:01:23 GMT

So I checked, the door is completely closed, no luck.

Re: 1D Mark 2

ebiggs1 — Sun, 30 Jul 2017 16:53:07 GMT

Unfortunately I have seen this before . It is probably through and not worth repairing either. They are great cameras. I have/had all three versions (II, II n and 2s). I still use the II n upon occasion. My Mk II died exactly like you are describing yous.

However, Midwest Camera will repair it if they have parts and if you so desire.

Re: 1D Mark 2

Krisdl16 — Sun, 30 Jul 2017 17:57:07 GMT

I’m curious though because the batteries are off brand.
And my charger seems to be acting weird, almost like I charge it and they say they’re full and I can unplug them and it acts like they’re empty?

Also, when I put a dead battery in the camera turns on and shows the empty battery flashing.

Re: 1D Mark 2

TTMartin — Sun, 30 Jul 2017 18:45:40 GMT

@Krisdl16 wrote:
I’m curious though because the batteries are off brand.
And my charger seems to be acting weird, almost like I charge it and they say they’re full and I can unplug them and it acts like they’re empty?

Also, when I put a dead battery in the camera turns on and shows the empty battery flashing.

I've had issues with 3rd party batteries not charging in Canon chargers (as you describe) and 3rd party battery chargers over charging genuine Canon batteries. So now I only charge Canon batteries in the Canon charger, and 3rd party batteries in the 3rd party charger.

Re: 1D Mark 2

Krisdl16 — Sun, 30 Jul 2017 19:09:40 GMT

I’m going to try and see if any of my friends have this battery. It’s a slim chance but I’ll try everything before I say bye lol

Someone said it could be a loose screw inside the camera that’s making it think it’s a dead battery also?

Re: 1D Mark 2

ebiggs1 — Mon, 31 Jul 2017 13:21:17 GMT

This is what you said............

"My canon for some reason won’t turn on!
The batteries are fully charged but no luck."

Now is this true or not? I have used the 1D Mk II in all its variants for a long time so I am pretty familiar with it/them.

You need to have a real deal fully charged "Canon" battery. You need to try it that way. It is the "only" way ! No 3rd party junk.

Re: 1D Mark 2

lly3988 — Mon, 31 Jul 2017 14:26:28 GMT

Investing in a Canon original LP E19 for your "not sure it will work" 1D Mark 2 seems risky and not a good investment.

Try borrow one from friends or ask local repair shop to check it for you.

It doesn't make sense to pay around $200 for a battery to test your camera. An used 1D mark II can be have for as low as US$260 and it comes with a battery and charger. (check online store selling used camera)

Good luck.

update : the battery is NP E3 (LPE19 is for newer 1D series) It costs US$136 when you buy from Canon online store.

Re: 1D Mark 2

Krisdl16 — Mon, 31 Jul 2017 16:40:55 GMT

First off. Why would I make a false statement?

Secondly, the top screen turns on only to flash an empty battery.

Thirdly, I will check the local camera store and see if they will check it for me. I’ve worked with them a lot in the past with other things and they are extremely helpful.

Thanks!

Re: 1D Mark 2

lly3988 — Mon, 31 Jul 2017 17:42:57 GMT

Before you send it for repair/examination, I think it's a good idea to check the battery first. As you have mentioned " the top screen turns on only to flash an empty battery" it could probably be a weak battery - either not well charged or the battery is dead. Original batteries are good but third party batteries purchased from reliable source are sometimes as good but may not last that long. I used third party LP E6 for my 5D3 and never have a problem. (I would say 20% of the cost and 85% of the performance)

When you insert the battery into the charger, does it show full charge in a few minutes ? If so, the battery is at the end of it's cycle. You may misunderstand that the the battery is fully charged. Clean the contacts of the battery and the charger and try one more time. If you are certain that the battery is in good working condition, it may be the problem with the camera.

I have seen battery connection problem due to loose screw inside a 7D. But, since the top LCD panel showed sign of power supply, it could be some other problem.

Finally, don't get upset if you feel offended. Relaxed and enjoy your hobby.

Re: 1D Mark 2

lly3988 — Mon, 31 Jul 2017 17:44:31 GMT

also please check the button battery CR2025 and replace it

Re: 1D Mark 2

Krisdl16 — Mon, 31 Jul 2017 17:52:26 GMT

You’re so helpful! I appreciate it so much!

The battery does say it is fully charged within idk, 15 minutes. I take it off the charger and plug it directly back in and it says it’s empty.

I wonder if the store will allow me to use a full battery to turn it on.

Re: 1D Mark 2

lly3988 — Mon, 31 Jul 2017 18:02:49 GMT

Yeah. Seems like a battery/charging problem. The battery has to be charged at least 2 to 3 hours to get a full charge. If it stops charging after 15 minutes, then it's the battery problem and not the camera.

Go out and get some help from the repair shop, they may have something for you. NP E3 isn't always immediately available but if you rule out that the camera has a problem, you may consider to buy a replacement battery. Search online. (due to forum rules, can't suggest off brand products)

Post back if you find a solution.

Re: 1D Mark 2

Krisdl16 — Mon, 31 Jul 2017 18:13:30 GMT

Well great, I will go do that! Thank you for all of your help!

Re: 1D Mark 2

ebiggs1 — Mon, 31 Jul 2017 21:22:16 GMT

Didn't say it was false just confusing as later you said, " I put a dead battery in the camera turns on ..." But first you said, "My canon for some reason won’t turn on!"

Re: 1D Mark 2

ebiggs1 — Mon, 31 Jul 2017 21:25:00 GMT

"also please check the button battery CR2025 and replace it"

Has nothing to do with the 1D Mk II powering up. It only keeps the date/time function alive.