topic Re: error 99 when using neewer fc-16 transmitter in EOS DSLR & Mirrorless Cameras

error 99 when using neewer fc-16 transmitter

mjc3333 — Mon, 02 Sep 2019 00:41:00 GMT

I have an older Canon Rebel from 2003 that I am trying to use with a multiple flash setup. I have a Neewer FC-16 setup with 1 transmitter and 2 receivers. When I try to use the transmitter connected to the hotshoe on the camera, it sends the error 99 code to the camera. If I remove the transmitter and turn the camera back on, everthing is fine. Is there some special setting to make the transmitter work, and not throw the error 99 code??

Re: error 99 when using neewer fc-16 transmitter

Waddizzle — Mon, 02 Sep 2019 12:29:08 GMT

You need to talk to Neewer. Sometimes a device on the hot shoe must be turned on before you turn on the camera.

Re: error 99 when using neewer fc-16 transmitter

ebiggs1 — Mon, 02 Sep 2019 16:18:55 GMT

I have not tried to use that particular combo but I would stop using it immediately until you get exact instructions. It may never work and could possibly damage the old Rebel. The camera doesn't like something and is trying to tell you. Canon won't help you with that combo either!

I have a friend with a Nikon that tried to get a Neewer FC-16 to work and never could.

Re: error 99 when using neewer fc-16 transmitter

mjc3333 — Mon, 02 Sep 2019 17:44:01 GMT

What combo have you used that works? I just need a wireless trans/rec setup for 2 speedlite flashes. I realize the "cheaper" units only send a signal to the receivers to make the flash go off. All settings are manual on the camera and the flashes.

Re: error 99 when using neewer fc-16 transmitter

Waddizzle — Mon, 02 Sep 2019 17:57:11 GMT

@mjc3333 wrote:
What combo have you used that works? I just need a wireless trans/rec setup for 2 speedlite flashes. I realize the "cheaper" units only send a signal to the receivers to make the flash go off. All settings are manual on the camera and the flashes.

Ernie is right. That transmitter may damage your camera. Without know what “2 specific flashes” you have, no one can advise you on what to do. I know Canon is the best brand to use. I have heard mixed reviews on Yungnuo. Radio works batter than light signals.

Re: error 99 when using neewer fc-16 transmitter

mjc3333 — Mon, 02 Sep 2019 18:28:00 GMT

I have two Neewer 565EX-E-TTL speedlite flashes. They both work on the camera on the hot shoe as individual flashes.

Re: error 99 when using neewer fc-16 transmitter

Waddizzle — Mon, 02 Sep 2019 18:39:59 GMT

@mjc3333 wrote:
I have two Neewer 565EX-E-TTL speedlite flashes. They both work on the camera on the hot shoe as individual flashes.

You need to contact Neewer. Canon is not responsib le for making third party gear work with Canon gear.

Re: error 99 when using neewer fc-16 transmitter

ebiggs1 — Mon, 02 Sep 2019 21:41:49 GMT

It is always best to stick with Canon brand no matter what add on gear you want to use.

"Canon Rebel from 2003"

What Rebel? It may not have the firmware designed to work with what you are trying to do. That was the buddies problem with his Nikon not working with it.

I have used all types, always Canon, and what you were told, wireless radio is best, by far.

"You need to contact Neewer. Canon is not responsib le for making third party gear work with Canon gear."

"Radio works batter than light signals."

Re: error 99 when using neewer fc-16 transmitter

mjc3333 — Mon, 02 Sep 2019 21:51:38 GMT

Canon Rebel DS6041. I think it was the very first EOS digital rebel canon produced. I am not going to try to use the fc-16 wireless. Does anyone know a cannon wireless setup that would work?

Re: error 99 when using neewer fc-16 transmitter

ebiggs1 — Mon, 02 Sep 2019 21:59:18 GMT

Wow, that is an oldie! I have never used one, so that's right up front but I am also going to say the old boy won't support a wireless transmitter set up.