https://community.usa.canon.com/t5/EOS-DSLR-Mirrorless-Cameras/R6-will-no-longer-automatically-clean-the-sensor-at-power-down/m-p/475559#M115570 <P>This would appear to be an issue with the camera self cleaning system.</P><P>I looked on <A href="https://www.canon-europe.com/support/consumer/products/cameras/eos-r/eos-r6.html?type=errorcode&amp;errordetailid=tcm:13-1335404" target="_blank" rel="noopener">Canon Europe website</A> and searched for the Err 06 and found this…</P><DIV class=""><DIV class=""><H2>Err 06</H2></DIV></DIV><DIV class=""><DIV class=""><H3>Description</H3><DIV class="">The sensor cleaning is not possible.</DIV></DIV><DIV class=""><H3>Resolution</H3><DIV class=""><OL><LI>Turn the power switch off and then on again</LI></OL><P>If the error message is still showing, then it is necessary to deliver or send the camera to an authorised repair centre.</P></DIV></DIV></DIV> Thu, 02 May 2024 21:19:32 GMT p4pictures 2024-05-02T21:19:32Z https://community.usa.canon.com/t5/EOS-DSLR-Mirrorless-Cameras/R6-will-no-longer-automatically-clean-the-sensor-at-power-down/m-p/475543#M115567 <P>I was customizing my buttons and making a few changes to my R6 (and of course did not back it up), well something I did now gives me an ERR 06 and says it can not clean the sensor. I have tried "Clean Now" "Clean at Power Off", and "Enable". The last one was a bear to finally clear. Still no good. Camera has latest version uploaded. No other problems, but would like to get it back to sensor cleaning without having to do a complete reset.</P> Thu, 02 May 2024 18:09:06 GMT https://community.usa.canon.com/t5/EOS-DSLR-Mirrorless-Cameras/R6-will-no-longer-automatically-clean-the-sensor-at-power-down/m-p/475543#M115567 Blacksmith 2024-05-02T18:09:06Z https://community.usa.canon.com/t5/EOS-DSLR-Mirrorless-Cameras/R6-will-no-longer-automatically-clean-the-sensor-at-power-down/m-p/475559#M115570 <P>This would appear to be an issue with the camera self cleaning system.</P><P>I looked on <A href="https://www.canon-europe.com/support/consumer/products/cameras/eos-r/eos-r6.html?type=errorcode&amp;errordetailid=tcm:13-1335404" target="_blank" rel="noopener">Canon Europe website</A> and searched for the Err 06 and found this…</P><DIV class=""><DIV class=""><H2>Err 06</H2></DIV></DIV><DIV class=""><DIV class=""><H3>Description</H3><DIV class="">The sensor cleaning is not possible.</DIV></DIV><DIV class=""><H3>Resolution</H3><DIV class=""><OL><LI>Turn the power switch off and then on again</LI></OL><P>If the error message is still showing, then it is necessary to deliver or send the camera to an authorised repair centre.</P></DIV></DIV></DIV> Thu, 02 May 2024 21:19:32 GMT https://community.usa.canon.com/t5/EOS-DSLR-Mirrorless-Cameras/R6-will-no-longer-automatically-clean-the-sensor-at-power-down/m-p/475559#M115570 p4pictures 2024-05-02T21:19:32Z