topic Re: R8 + RF-S 10-18 in EF & RF Lenses

R8 + RF-S 10-18 = Won't shoot

EAN777 — Tue, 14 May 2024 13:15:16 GMT

I connected the new RFS 10-18 to my R8 and did not use automatic crop. My R8 has firmware 1.2.0 installed. At the same time, shooting videos and photos is not possible. The display says "manual focus". When the shutter button is pressed, the MF label blinks.

Help me...

Re: R8 + RF-S 10-18

kvbarkley — Mon, 13 May 2024 19:30:20 GMT

I assume an RF lens works OK?

What do you mean by "did not use automatic crop"? You cannot get a full frame image from an RF-S camera, and I can easily imagine that it would freak out the focus around the area of the frame outside the 1.6X crop.

Re: R8 + RF-S 10-18

EAN777 — Mon, 13 May 2024 19:34:58 GMT

RF lens 15-30 mm works!

What do you mean by "did not use automatic crop"?

Maybe I'm wrong, but I thought that using a RF-S lens on a full-frame camera, I would automatically crop image (1.6x). But this did not happen and the camera cannot record video or photos on the RF-S lens.

Re: R8 + RF-S 10-18

EAN777 — Mon, 13 May 2024 19:39:31 GMT

RF-S 10-18RF-S 10-18RF 15-30

Re: R8 + RF-S 10-18

kvbarkley — Mon, 13 May 2024 19:40:01 GMT

It does, and if it does not, there is something wrong with the camera or the lens. (look at the second bullet below.)

Does the EXIF data show the correct lens?

Re: R8 + RF-S 10-18

EAN777 — Mon, 13 May 2024 19:41:18 GMT

https://www.youtube.com/shorts/QoBYXZPSTp0

RF-S not work (

Re: R8 + RF-S 10-18

EAN777 — Mon, 13 May 2024 19:47:07 GMT

Movie cropping - onF00? MF! No recFirmware detailFirmware on camera

Re: R8 + RF-S 10-18

shadowsports — Mon, 13 May 2024 20:14:35 GMT

Greetings,

The F00 error indicates the lens and body are not communicating. The fact that you got it connected once without the camera going into crop mode on its own is not correct (again, it signifies a communication failure). FW 1.2.0 added support for the RF-S 10-18 and it should correctly detect and use crop mode if this lens is attached.

I would remove the lens and reset the camera's settings to default both main and custom settings. Then retest. If you continue to experience strange behavior when this lens is attached, I'd contact support.

Re: R8 + RF-S 10-18

EAN777 — Mon, 13 May 2024 20:25:58 GMT

@shadowsports wrote:
Greetings,
The F00 error indicates the lens and body are not communicating. The fact that you got it connected once without the camera going into crop mode on its own is not correct (again, it signifies a communication failure). FW 1.2.0 added support for the RF-S 10-18 and it should correctly detect and use crop mode if this lens is attached.
I would remove the lens and reset the camera's settings to default both main and custom settings. Then retest. If you continue to experience strange behavior when this lens is attached, I'd contact support.

Thx
It worked