topic TS5120 Printer won't print correct size even after registering correct paper size in Desktop Inkjet Printers

TS5120 Printer won't print correct size even after registering correct paper size

khaugrud — Sat, 13 Feb 2021 18:50:25 GMT

I'm trying to print on 8.5 X 11 paper and it keeps printing smaller. I have registered the correct sizes in the rear tray and the front tray and it's still wrong. I tried unplugging it and plugging it back in. Still wrong. I have the latest drive. Still wrong!! I am still getting the code 2114 and the wrong paper size keeps coming up. Can anyone help here?

Re: TS5120 Printer won't print correct size even after registering correct paper size

shadowsports — Sat, 13 Feb 2021 19:31:56 GMT

Greetings,

3 places where you can specify / register paper size.

Printer

Driver

Application you are printing from

Any one of these can affect or contridict the output.

If you are geting 2114 error, see this article which may help identify where the settings are conflicting:

Canon : PIXMA Manuals : TS5100 series : 2114

Re: TS5120 Printer won't print correct size even after registering correct paper size

khaugrud — Sat, 13 Feb 2021 19:54:46 GMT

Thanks for the help. I tried going to the article and going to the printers and scanners and "show printer web page" as directed I just get the following error: NET::ERR_CERT_AUTHORITY_INVALID

Any ideas what that's about?

Re: TS5120 Printer won't print correct size even after registering correct paper size

shadowsports — Sun, 14 Feb 2021 00:53:38 GMT

NET::ERR_CERT_AUTHORITY_INVALID

This is a certificate error displayed by your browser when accessing the printers built in web server.

Press Advanced

Then Continue

Now make the desired changes to your printers settings via its webserver.

Please note. This is safe to do accessing the device on your home network when the destination is known to you.

When this is not safe: When you visit an external website where that sites certificate, identity or issuer cannot be verified.

MAC OS:

Since you provided your OS in another post, I can confirm that no driver for Big Sur exists currently. Last official driver was certified for Catalina. Dated 3-27-20.

The IJ Networking Tool could be all thats needed. If you had the driver for Catalina installed and updated to Big Sur OS, the driver may not work properly. Using a driver intended for a different OS might have unexpected results.

An updated driver for Big Sur might become available, but we have no idea when or if this might occur.