topic Re: Canon G3200 3 blinking orange light error in Desktop Inkjet Printers

Canon G3200 3 blinking orange light error

F_galarza — Mon, 03 Aug 2026 00:35:51 GMT

The printer Canon G3200 is running fine yesterday, today I send for printing image and the orange light blinking 3 time pause and agin 3 blinking continue. It's supposed paper jam but I check, clean a fiber or hair inside but nothing paper pieces jam. I disconnet the power cable about 1 minute for reset, but nothing. I need help, what is the next to procedure or check again.

Re: Canon G3200 3 blinking orange light error

SamanthaW — Mon, 03 Aug 2026 00:47:51 GMT

Hi there!

We have several printers within the G series, can you give the full model number please? It'll say either PIXMA or MAXIFY and then it'll say G32xx where the x's are two numbers! This can be found on the front or the top of the printer itself.

Re: Canon G3200 3 blinking orange light error

F_galarza — Mon, 03 Aug 2026 01:14:38 GMT

Pixma G3200

Re: Canon G3200 3 blinking orange light error

Patrick — Tue, 04 Aug 2026 17:46:37 GMT

Hi F_galarza,

If the PIXMA G3200 detects a paper jam, the error light will blink 3 times.

To check for jammed paper, please follow the steps provided from the manual using the links below:

PIXMA G3200 - ERROR 1300

PIXMA G3200 - Paper Is Jammed inside Machine

If you continue to experience an error with your PIXMA G3200, please contact one of Canon's Technical Support Representatives via phone or chat. To contact a Technical Support Representative, please use the link below to log into your My Canon account:

https://mycanon.usa.canon.com

Once logged in, click on your PIXMA G3200 and then click on the Product Support button. When that page loads, click on either the Phone Support button or the Chat Support button to access support.

Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.

Re: Canon G3200 3 blinking orange light error

F_galarza — Tue, 04 Aug 2026 20:10:13 GMT

Thanks for help me I resolve, inthe sleave to put paper take a little piece object inside, not visible. It's working fine again. Thanks