topic Re: mg2922 wont work with Windows 11, cannot find the printer when cable in in Desktop Inkjet Printers

PIXMA MG2922 wont work with Windows 11, cannot find the printer when cable in

Stevesj — Mon, 29 Jun 2026 12:12:30 GMT

PIXMA MG2922 wont work with Windows 11, Downloaded drivers and they cannot find the printer when cable in

Re: mg2922 wont work with Windows 11, cannot find the printer when cable in

DerrickL — Mon, 29 Jun 2026 10:49:10 GMT

This is the full driver and scan utility package:

https://pdisp01.c-wss.com/gdl/WWUFORedirectTarget.do?id=MDEwMDAwNTk5NDAy&cmp=ABR&lang=EN

dowloaded from here: https://www.usa.canon.com/support/p/pixma-mg2922

Run the drivers again, but do not plug in the printer cable until prompted to do so.

Re: mg2922 wont work with Windows 11, cannot find the printer when cable in

Stevesj — Mon, 29 Jun 2026 13:51:56 GMT

This are the ones I used and on retry, it still cannot find the printer when selection USB

Re: PIXMA MG2922 wont work with Windows 11, cannot find the printer when cable in

Patrick — Tue, 30 Jun 2026 17:34:49 GMT

Hi Stevesj,

With your PIXMA MG2922 powered on and the USB cable connected from your printer directly to your computer, please press the Windows key on your keyboard and the letter "X", then let both go.

In the menu that appears, click on Device Manager.

In Device Manager, do you see your printer listed under:

Print queues
Unknown devices
Universal Serial Bus controllers
Universal Serial Bus devices

If you do, please right click the printer and left click on Uninstall or Remove.

Once gone, please disconnect the USB cable and run the installation program again. Once the program attempts to detect the printer, reconnect the USB cable with your printer on.

Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.