topic Re: PIXMA TR4722 Error 5100 when printing from the network in Desktop Inkjet Printers

PIXMA TR4722 Error 5100 when printing from the network

Michelle_Scott — Thu, 12 Feb 2026 02:36:37 GMT

Hi all,

My TR4722 no longer prints properly over a network connection. It will recognize the print job, however, it would make a terrible noise and scrunch up the paper when outputting the document! This has been going on for some time now, so any and all advice welcome.

Re: PIXMA TR4722 Error 5100 when printing from the network

DerrickL — Thu, 12 Feb 2026 15:09:08 GMT

This is not a network problem. Most likely you have an obstruction, a piece of paper somewhere in the print head carriage. It can be very small and still cause a paper jam.

Error code 5100 on the PIXMA TR4722 typically indicates a problem with the printer's print head or ink cartridges. Check for any obstructions, ensure the cartridges are properly installed, and try resetting the printer.

Re: PIXMA TR4722 Error 5100 when printing from the network

Michelle_Scott — Thu, 12 Feb 2026 20:31:08 GMT

I tried something very unusual to correct the problem (cleaned the ribbon and the rollers with rubbing alcohol and a napkin). For some reason, although the error is gone, however, when I print in color on plain paper it bends a corner of the page! Eh, what should I do?

Re: PIXMA TR4722 Error 5100 when printing from the network

DerrickL — Thu, 12 Feb 2026 21:51:14 GMT

Check the rollers, make sure no obstruction in the path. These are other things to look for:

Causes of Page Corner Bending

Printer Issues

Roller Problems: Worn or damaged rollers can cause paper to bend or crumple during feeding.
Cleaning Impact: Improper cleaning of rollers may lead to damage, affecting paper handling.

Paper Quality

Old or Poor Quality Paper: Using aged or low-quality paper can lead to bending and wrinkling.
Paper Size and Type: Ensure the paper is cut correctly and matches the printer settings.

Solutions to Prevent Bending

Maintenance Steps

Check Rollers: Inspect and replace worn rollers if necessary.
Clean the Paper Path: Remove any debris or dust that may obstruct paper feeding.

Paper Handling

Use Quality Paper: Switch to a new batch of high-quality paper that is suitable for your printer.
Adjust Paper Settings: Ensure the printer settings match the type and size of the paper being used.

Printer Settings

Print Head Alignment: Perform a print head alignment to ensure proper printing.
Increase Print Quality: Adjust the print quality settings to improve output.