topic Re: MG2522 Printer not responding. Device ...requires further installation in Desktop Inkjet Printers

MG2522 Printer not responding. Device ...requires further installation

robmm76 — Fri, 26 Dec 2025 23:30:41 GMT

Printer worked yesterday. No software changes observed. Uninstalled driver, restarted, reinstalled, same result.

Re: MG2522 Printer not responding. Device ...requires further installation

Tiffany — Sat, 27 Dec 2025 04:30:21 GMT

Welcome to the forum!

So that the Community can help you better, let us know the exact error message. How are you connecting? Which version of Windows or macOS you are using? Any other details you'd like to give will only help the Community better understand your issue. The forum is not intended for immediate support. If this is a time-sensitive matter, click HERE search our knowledge base or find additional support options HERE

Re: MG2522 Printer not responding. Device ...requires further installation

DerrickL — Sat, 27 Dec 2025 14:49:11 GMT

This may help you:

https://appuals.com/how-to-fix-device-requires-further-installation-on-windows-10/

and this:

https://windowsreport.com/canon-mg2522-driver/

Re: MG2522 Printer not responding. Device ...requires further installation

robmm76 — Sat, 27 Dec 2025 20:48:55 GMT

Printer not responding. Device USBPRINT\CanonMG2500_series\7&2d705939&0&USB001 requires further installation.

Windows 11.

I have already searched your knowledge base and done what it says. There are no additional "support options."

Device manager says "This device is working properly."

Re: MG2522 Printer not responding. Device ...requires further installation

DerrickL — Sat, 27 Dec 2025 21:45:20 GMT

Did you try this driver?

https://sg.canon/en/support/0100668904

Also is the printer connected to the same USB port it was originally installed on?

Re: MG2522 Printer not responding. Device ...requires further installation

robmm76 — Sun, 28 Dec 2025 19:33:07 GMT

LPT1, same as always.

Re: MG2522 Printer not responding. Device ...requires further installation

Stephen — Sun, 28 Dec 2025 19:45:14 GMT

Hello!
That "Requires further installation" status in Windows typically indicates that the Plug-and-Play process started but didn't complete the driver association. Since the MG2522 is a corded USB printer, connection stability and the correct software package are key.

Recommended Troubleshooting Steps:

Check the Connection: Ensure you are using a high-speed USB 2.0 cable no longer than 6 feet. Plug it directly into the motherboard ports on the back of your PC rather than a front-panel port or a USB hub.
Clear the Partial Installation:
- Disconnect the printer USB cable.
- Go to Control Panel > Devices and Printers.
- If you see the MG2522 (it may be grayed out), right-click and select Remove Device.
- Restart your computer.
Manual Setup (The "Clean" Way):
- Go to https://ij.start.canon/MG2522 to download the official setup utility.
- Run the installer before plugging the printer back in. Only connect the USB cable when the software explicitly asks you to do so to prevent Windows from trying to install its own generic driver simultaneously.

Important Note: The MG2522 is a "Host-Based" printer. If your PC’s own USB chipset drivers are outdated, it can interfere with the printer's ability to finish the installation. Ensure your Windows Updates are current before starting the Canon setup.

If these steps don't get you back to printing, we’d love to help you walk through it. You can reach us at 800-OK-CANON (800-652-2666) Monday–Friday, 9am–6pm (ET), or log in at canon.us/account.

Official Canon Sources

Re: MG2522 Printer not responding. Device ...requires further installation

robmm76 — Mon, 29 Dec 2025 01:41:50 GMT

Been there, done them. Printer not responding, still. I'll try

the phone number tomorrow.

Thanks for your response.

Re: MG2522 Printer not responding. Device ...requires further installation

DerrickL — Mon, 29 Dec 2025 03:12:24 GMT

LPT 1 is usually a parallel port not a USB, that is most likely your issue.

USB cannot directly function as LPT1, but you can configure a USB printer to emulate LPT1 for compatibility with older software. This often involves using a virtual port or a specific adapter.

Re: MG2522 Printer not responding. Device ...requires further installation

robmm76 — Mon, 29 Dec 2025 17:15:03 GMT

So, what you are telling me is that Canon no longer supports parallel printers. When did this change occur and how do I back out the software updates which implemented the change.

Re: MG2522 Printer not responding. Device ...requires further installation

DerrickL — Mon, 29 Dec 2025 18:39:04 GMT

Canon quit supporting parallel printers in 2003, but that is not the real issue, your printer does not have a parallel port. So how are you actually connecting to your computer? Wifi? USB/printer cable? If you were connected to LPT1 was it a virtual wireless port used for a network or a usb to parallel adapter?

Re: MG2522 Printer not responding. Device ...requires further installation

robmm76 — Tue, 30 Dec 2025 01:44:43 GMT

Thank you for your support. It turns out that the problem was the pdf file I was trying to print. Other files have no trouble. Now I need to find another way to obtain the form.

Re: MG2522 Printer not responding. Device ...requires further installation

robmm76 — Tue, 30 Dec 2025 01:55:14 GMT

Now I see this. I was going by:

Re: MG2522 Printer not responding. Device ...requires further installation

robmm76 — Tue, 30 Dec 2025 22:07:43 GMT

Thanks again. The customer service phone number was what I needed.