topic Set MX924 Selection to be on Silent in Desktop Inkjet Printers

Set MX924 Selection to be on Silent

Flupsue — Mon, 10 Mar 2025 14:44:01 GMT

I would like to set the selection button not to beep when these are selected i.e to be silent

Please advise how to do this

Re: Set MX924 Selection to be on Silent

Arthur — Wed, 12 Mar 2025 12:26:11 GMT

Welcome to The Canon Community, and thank you for your inquiry!

We appreciate your participation, however, we need to let you know that the Canon Community is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.

If you live outside the United States, please C LICK HERE and select your country or region for your support needs.

You're welcome to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.

Re: Set MX924 Selection to be on Silent

Patrick — Wed, 12 Mar 2025 16:13:27 GMT

Hi Flupsue,

Please try these steps:

1. With your PIXMA MX924 powered on, press the MENU button one time.

2. Press the down arrow 7 times. "Setup", with the screwdriver and wrench icon, should now be selected. If not, please use the arrow until it is.

3. Press OK.

4. Press the left arrow to select Device settings and press OK.

5. Use the down arrow to select Device user settings and press OK.

6. Use the down arrow to select Sound control and press OK.

7. Press OK on Keypad volume.

8. You can choose from Loud, Standard, Quiet or OFF. Once you have made you selection, press OK.

If you just chose OFF, the key beep will now be gone.

This information can be viewed in the manual as well. To access this, please use this link:

MX920 series > Overview of the Machine > Changing Settings on the LCD > Device user settings

Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.

Re: Set MX924 Selection to be on Silent

Flupsue — Wed, 12 Mar 2025 17:05:22 GMT

Thanks for the help

Re: Set MX924 Selection to be on Silent

Patrick — Wed, 12 Mar 2025 17:56:19 GMT

You're welcome!