https://community.usa.canon.com/t5/Desktop-Inkjet-Printers/error-code-b200/m-p/50031#M7670 <P>I have an IP4700 printer which I've had for a couple of years and have been delighted with. Today it suddenly stopped and came up with the error code B200.</P><P>I looked at the entries on the forum which was helpful. By using a combination of the suggestions I was able to clear the error in a couple of minutes by doing the following:</P><OL><LI>Turned off the power supply</LI><LI>Opened the cover</LI><LI>Carefully dragged the cartridge carrier to the middle to enable access</LI><LI>Removed all the cartridges</LI><LI>Lifted the grey lever and removed the printhead</LI><LI>Raised the printhead carrier gently, (about 1cm) and then reseated it</LI><LI>Reinstalled the printhead, lowered the grey lever, replaced the cartridges, closed the lid and turned the power back on.</LI><LI>Success.</LI></OL> Wed, 20 Nov 2013 10:16:37 GMT pbg2629 2013-11-20T10:16:37Z https://community.usa.canon.com/t5/Desktop-Inkjet-Printers/error-code-b200/m-p/50031#M7670 <P>I have an IP4700 printer which I've had for a couple of years and have been delighted with. Today it suddenly stopped and came up with the error code B200.</P><P>I looked at the entries on the forum which was helpful. By using a combination of the suggestions I was able to clear the error in a couple of minutes by doing the following:</P><OL><LI>Turned off the power supply</LI><LI>Opened the cover</LI><LI>Carefully dragged the cartridge carrier to the middle to enable access</LI><LI>Removed all the cartridges</LI><LI>Lifted the grey lever and removed the printhead</LI><LI>Raised the printhead carrier gently, (about 1cm) and then reseated it</LI><LI>Reinstalled the printhead, lowered the grey lever, replaced the cartridges, closed the lid and turned the power back on.</LI><LI>Success.</LI></OL> Wed, 20 Nov 2013 10:16:37 GMT https://community.usa.canon.com/t5/Desktop-Inkjet-Printers/error-code-b200/m-p/50031#M7670 pbg2629 2013-11-20T10:16:37Z