topic PIXMA TR7520 error code 6004 in Desktop Inkjet Printers

PIXMA TR7520 error code 6004

Kandi — Tue, 24 Sep 2024 15:37:42 GMT

Was wondering if anyone knows how to clear an error code 6004 from a cannon printer, tried to correct it by unplugging it no luck

Re: error code 6004

Stephen — Thu, 19 Sep 2024 17:55:45 GMT

Hello!
So that the Community can help you better, we will need to know more information:
• What is the exact model printer you're using (it's usually on the top or front of the unit)?
• Which version of Windows or macOS are you using?
• How do you connect to your printer (USB or WiFi)?

Any other details you'd like to give will only help the Community better understand your issue.

If you're in the United States, and this is an urgent support need, please click HERE to visit your My Canon Account to discover your personalized support options.

If you're outside the USA, please click HERE to find support options in your country.

Thanks, and have a great day!

Re: error code 6004

Kandi — Fri, 20 Sep 2024 14:23:39 GMT

Good morning,

The exact model printer I'm using is a Cannon TR7500 series printer and the version of Windows that I have is Windows 11 and it is connected to my computer by WIFI

Re: error code 6004

Kandi — Fri, 20 Sep 2024 14:30:17 GMT

The model cannon printer I'm using is a Pixma TR 7520

Re: error code 6004

Kandi2 — Tue, 14 Jan 2025 02:43:29 GMT

I'm using the model Cannon TR7500 series and I'm using windows 11 and I connect my printer through Wi-Fi

Re: error code 6004

Kandi2 — Tue, 14 Jan 2025 02:45:42 GMT

It'd also a pixma Cannon printer

Re: PIXMA TR7520 error code 6004

Hlounnaci — Sat, 15 Feb 2025 22:07:50 GMT

I have some problem error 6004

Re: PIXMA TR7520 error code 6004

Yardman — Sat, 15 Mar 2025 16:49:15 GMT

I purchased a used TR7520, and when I started it i got a Code 6004, and couldn't clear it. The Website indicated paper shreds somewhere inside the printer, but none existed. the alternative is to maybe buy a new one at a discount - what! I opened the cover to observe what was happening when I hit the power button, but that in itself is a deal killer. I did however notice that the printhead ink tray seemed to stop mid way in the boot process. Short story is I put a shim in the slot to fool the printer into thinking the lid was closed and observed. The print head wasn't moving at all, thus the error code. Someone posted that they had turned a gear on the side of the printer just a little bit, I did that and the print head was able to move. then I noticed a gummy ink on the waste area where the print head rested. I cleaned it with a tooth brush and IPA, I also cleaned the print head completely and reinstalled the cartridges. Then tried to boot it up again. It worked! I got an error that the rear tray had an open flap or some such thing, but it did boot to ready - no error 6004. I wiped the carriage guide piece of metal with silicon, and attempted to clean the rest of the inside of the printer. I started printing. Some of the ink was blurred but the document I printed was duplex and 5 pages, by the end of the print job all was fixed. Cleanliness is next to "printliness" I suppose. This printer is more sensitive than my grandchildren! But it's a nice printer, and not too expensive.