topic PIXMA MX 490 printer did not work after power outage in Desktop Inkjet Printers

PIXMA MX 490 printer did not work after power outage

Grace2024 — Tue, 21 May 2024 17:17:12 GMT

Hi All,

I really need some help. My PIXMA MX 490 printer did not work after power outage.

I appreciate those relevant helpful tips/points in this community. Following what I learned, here are what I did:

Unplugged the power cord from the back of the printer and from the surge protector and left them out for ~15 minutes, then plugged it back in – but changed to another port.
Turned on the printer, it showed green light, at least not flashing error light.
Tried to print “Test” (Word doc), a blank page came out when in fact the Black and color inks are all fine. Two times of trying failed.

So, what else should I do? Any suggestions or help are highly appreciated!

Re: PIXMA MX 490 printer did not work after power outage

ArthurJ — Thu, 06 Jun 2024 16:55:30 GMT

Hi,

So we can narrow down if this is a hardware or software issue, please print a nozzle check using the steps HERE.

Once the nozzle check prints, please attach a copy of it to your reply.

We look forward to hearing from you.

Re: PIXMA MX 490 printer did not work after power outage

Grace2024 — Sat, 15 Jun 2024 20:42:50 GMT

Hi Arthur,

Thank you so much for your reply and instructions. Sorry for the delayed response, because not only previous issue persisted, but also new issue with error code B204.

The service light (orange/yellowish) kept flashing all the time, no matter how many times I turned off printer (+unplugging power cord) and then back on as instructed (or shared tips). Nevertheless, the ink cartridges couldn’t move to the center. I couldn’t print nozzle check pattern.

Note: my cartridges are nearly half-full.

Thankfully, I finally found a helpful video “Canon Pixma mx492 error code b203 or b204” After following the steps advised per video, I manually moved the cartridges to the center and tested with empty Canon Cartridges (because my ink cartridges are not Canon origin), then NO flashing yellow light anymore.

So, it seems that I may need to throw away my current ink cartridges.?

Re: PIXMA MX 490 printer did not work after power outage

ArthurJ — Wed, 30 Oct 2024 15:58:06 GMT

Hi,

Since the lights cleared with the Canon cartridges, I would recommend replacing the current third party cartridges with Canon ink.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Re: PIXMA MX 490 printer did not work after power outage

Grace2024 — Wed, 30 Oct 2024 19:43:17 GMT

Thanks.