Blurred text

geoffsummers — Fri, 28 Oct 2016 20:35:48 GMT

I have a Canon iP8750. It is less than 2 years old.

Some lines of black text are appearing blurred: line one is sharp, lines 2, 3 and 4 are blurred, line 5 is sharp and so on.

I have:

cleaned the nozzels, replaced the cartridges with Canon and non-Canon products, reinstalled the drivers and used a different PC, all without improvement. I have printed text in different colours, all are sharp, only black text appears affected.

On printing a test pattern I note the grid pattern at the top of the set of prints appears to be faulty:

The text "PGBK" is blurred but, whilst the grid lines at the top and bottom are OK, the vertical lines are split into 2 grey lines and the horizontal lines, whilst remaining single, are grey and not sharp.

I hope someone can tell me how to overcome this problem.

Re: Blurred text

jrhoffman75 — Sat, 29 Oct 2016 12:53:03 GMT

Give Canon a call at 1-800-OK-CANON.

topic Re: Blurred text in Desktop Inkjet Printers

Blurred text

Re: Blurred text