topic Re: I wanted to scan several photo prints together (not separately) in Desktop Inkjet Printers

I wanted to scan several photo prints together (not separately)

goggled — Sun, 29 Oct 2017 09:37:32 GMT

These were all of our grandchild taken 18 years ago, and were to be sent attached to an email. There were quite a few, so I decided to place three or four on the MG68** platen with slight gaps between them. The recipient would deal with printing.

However having selected that I was scanning as photos, I was disappointed that the output either had overlapping, half printed or otherwisw bad outcomes. This was not because the items on the platen had become displaced.

Trying automated mode could cope but of course output was PDF which would need conversion to jpg.

I therefore had to scan each picture separately.

Why could the scanner function not cope with my need? Anyone with ideas, please.

Re: I wanted to scan several photo prints together (not separately)

Ramona — Tue, 31 Oct 2017 04:40:04 GMT

Hi goggled,

Depending on the spacing of the items that were placed on the platen glass, the printer may not have been able to scan all of the photos completely. When placing items on the platen glass for scanning, you will need to allow 0.4 inch (1 cm) or more space between the edges of the platen and items, and between items. More information on placing and positioning items on the platen glass for scanning can be viewed here.

Re: I wanted to scan several photo prints together (not separately)

goggled — Tue, 31 Oct 2017 15:37:48 GMT

I shall keep that noted, should I want to do similar next time