topic Re: Pixma mg-3522 frozen: lights lit, buttons don't work in Desktop Inkjet Printers

Pixma mg-3522 frozen: lights lit, buttons don't work

farzival — Sun, 31 Jul 2016 21:03:55 GMT

My mg-3522 has stopped responding. Two lights on the device are lit up when it's plugged in:

1) the light beside the power button

2) the light beside the "4 x 6 photo paper" button

Other than that, it's completely unresponsive and can not be recognized by the computer. I've tried a LAN connection as well as a WIFI connection. Holding the power button, WIFI button, or the stop button for an extended period of time does nothing.

I've tried deleting the drivers and updating them, but I can never get past the "please connect the printer" screen.

Has anyone else encountered this? I emailed customer support, but I believe they are closed for the weekend. I was hoping to have this resolved while on my time off.

Thanks!

Re: Pixma mg-3522 frozen: lights lit, buttons don't work

Patrick — Tue, 02 Aug 2016 15:36:15 GMT

Hi farzival,

Please trry printing a test page from your PIXMA MG3522. To do this, please follow these steps:

1. Make sure that your PIXMA MG3522 is turned on.

2. Load a sheet of Letter-sized plain paper in the front tray.

3. Open the output tray extension, open the paper output tray, then extend the paper output support.

4. Hold down the STOP button until the Alarm lamp flashes orange once, then release it immediately.

Does the test page print?

Re: Pixma mg-3522 frozen: lights lit, buttons don't work

newmailrandy — Wed, 19 Dec 2018 05:11:34 GMT

No. It doesn’t work. It’s frozen.

Re: Pixma mg-3522 frozen: lights lit, buttons don't work

ArthurJ — Wed, 19 Dec 2018 16:01:02 GMT

Hi newmailrandy,

I recommend performing a reset of the printer. While the printer is on, unplug the power cord from the printer and let it sit for 60 seconds. While the power is off, press the power button 5 times. After 60 seconds plug the power cord back in and power on the printer.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

If the printer is still frozen, troubleshooting with our support group will be needed to narrow down the cause of the issue. Please contact our support group using the "Contact Us" link below for additional assistance. You will have the option to speak to one of our phone or live chat agents.

We look forward to hearing from you.