My mx 452 isn't printing

dlb1944 — Thu, 30 Apr 2015 15:41:40 GMT

it goes through all the motions as if it is printing however the page is blank I've cleaned ink heads with no success. Any thoughts or fixes for this situation ?

Re: My mx 452 isn't printing

Patrick — Mon, 01 Jun 2015 19:07:31 GMT

Hi dlb1944,

First, a test should be performed of your PIXMA MX452. The Nozzle Check pattern shows if each print head nozzle is operating properly. Please perform the following steps to print a Nozzle Check pattern:

1. Load letter-sized, plain paper in the rear Tray.

2. Press the SETUP button on your PIXMA MX452.

3. Press the left or right button until [MAINTENANCE] is displayed in the LCD, and then press OK.

4. Press the left or right button until [Nozzle check] is displayed in the LCD, and then press OK. The nozzle check pattern is printed. Please compare your printout to the example that has been attached to the bottom of this post.

If the page prints incorrectly, printhead cleanings should be performed. Please follow the instructions below to clean the printhead:

1. Press the SETUP button.

2. Press the left or right button until [MAINTENANCE] is displayed in the LCD, and then press OK.

3. Press the left or right button until [CLEANING] is displayed in the LCD, and then press OK.

After 3 or 4 cleanings, print another test page.

Does the test page print correctly?

topic Re: My mx 452 isn't printing in Desktop Inkjet Printers

My mx 452 isn't printing

Re: My mx 452 isn't printing