Does not copy and scan using ADF

jaims — Thu, 19 Apr 2018 06:56:00 GMT

Hi everyone!

I would just like to ask if anyone knows how to fix ADF of G4000. The printer does not accept documents to copy or scan using the ADF

Thanks!

Re: Does not copy and scan using ADF

BillS — Mon, 30 Apr 2018 22:45:33 GMT

Hi jaims,

To scan a document at optimum quality, load it on the platen glass. If you prefer to use the document feeder:

Make sure that any original has been removed from the platen glass.
Open the document tray.
Insert the document in the document tray until you hear a beep sound.
Load the document WITH THE SIDE TO SCAN FACING UP in the document tray.
Note
- For details on the supported originals, see below.
  - Supported Originals
- When you set the alarm to be silent in Sound control of Dev. user settings, the alarm will not beep even if the document is inserted in the document tray.
  - Sound control
Adjust the document guide (A) at the front of the printer to match the width of the document.
Do not slide the document guide too hard against the document. The document may not be fed properly.

This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.