topic Re: MX922 just started squeaking after printing complete in Desktop Inkjet Printers

MX922 just started squeaking after printing complete

JustAnotherSoul — Mon, 19 Nov 2018 10:14:06 GMT

Any suggestions on what to do?

This printer is relatively new.

Thanks.

Re: MX922 just started squeaking after printing complete

shadowsports — Tue, 20 Nov 2018 15:31:16 GMT

Greetings,

You need to figure out whats squeaking. Feeding mechinism, ink carrier/delivery, rollers, etc

Start with a can of compressed air. Clean everything. Q-Tips with alcohol is another good tool. White lithium grease applied (very) sparingly might help dependijgn on whats noisy. Rollers usually have to be replaced.

Lots of plastic mounted on metal rods that use little "C" clips for retention. Tolerances vary, squeaks happen. Sometimes they are pretty hard to track down.

Re: MX922 just started squeaking after printing complete

Michael — Wed, 21 Nov 2018 19:30:38 GMT

JustAnotherSoul,

It would be best to contact our phone support group at 1-800-652-2666 from 10AM to 10PM EST Monday through Friday (Excluding Holidays). A live agent will be able to listen to the sound that you described and go from there.

This didn't answer your question or issue? Find more help at Contact Us.