topic Re: TS-9120 print/scan problem in Desktop Inkjet Printers

TS-9120 print/scan problem

verazee — Sun, 11 Nov 2018 23:33:18 GMT

I drew a couple small pattern, scanned into my computer and then printed. The problem is that when I print what I have scanned all the designs come out to way to big. How do I set up my printer to print to the original scale? Thanks for the help.

Re: TS-9120 print/scan problem

Ronster149 — Mon, 12 Nov 2018 12:29:11 GMT

I had a similar issue recently. I guess it all depends on what software you are using to print the patterns from. I was using Windows Photo Viewer. Right when I got to the print preview, it looked like it had blown the picture up. I finally realized I had to uncheck the box that said "Fit picture to frame". Once I did that, it printed in original size. Not much help, but worth a try?

Re: TS-9120 print/scan problem

verazee — Mon, 12 Nov 2018 17:13:07 GMT

Thanks for your help; I'll give it a try.

Re: TS-9120 print/scan problem

verazee — Mon, 19 Nov 2018 17:19:58 GMT

This was a good idea but it didn't work. Now if I have a PDF and I tell the printer to print at 100% it will be the correct size. Maybe I should save my pattern pieces as PDF's and see if that works.