topic Re: G4210 printing blank pages in Desktop Inkjet Printers

G4210 printing blank pages

tank2601 — Sun, 16 Feb 2020 17:40:39 GMT

Can anyone help with my printing issue? My printer just spits out blank pages. Not tech savvy, can't figure out what's wrong. I'm surprised I got it hooked up via wifi in the first place. Thanks in advance!

Re: G4210 printing blank pages

Patrick — Mon, 17 Feb 2020 19:16:55 GMT

Hi tank2601,

First, please make sure that the black ink level is sufficient.

The ink should be above "B", as in the image below:

If the black ink is above the "B" line, next, please print a test page:

1. Please press the wrench and screwdriver button

2. Press the Left or Right button to select Maintenance and press the OK

3. Press the Left or Right button to select Nozzle check and then press the OK button

Does your printout look like the example below? Does the back grid "A" print on your page?

Re: G4210 printing blank pages

tank2601 — Tue, 18 Feb 2020 16:36:02 GMT

Thank you, Patrick, for your response. My ink levels are all above half - I don't print much. Also, I did do a nozzle check and the print came out perfectly. I've had this printer for awhile and this is the first time I came across this problem. I have my printer on a power cord; shut it down after using and turn off the power. That's how infrequently I use the printer. So I unplugged it for a couple of days and haven't tried it since. Perhaps it just needed to reset itself, and reconnect to my wifi. Thanks again, for your response.

Re: G4210 printing blank pages

tiotaco — Thu, 07 Jan 2021 18:48:37 GMT

I have same problem, nozzle check is normal but prints blank pages.

Re: G4210 printing blank pages

rnhent12 — Sat, 31 Jul 2021 14:36:39 GMT

It does not print grid A

Re: G4210 printing blank pages

Patrick — Wed, 22 Sep 2021 20:09:40 GMT

Hi mhent12,

Please perform 2 printhead cleanings:

1. Please press the wrench and screwdriver button on your printer.

2. Repeatedly press the right arrow button to select Maintenance and press the OK.

3. Press the right arrow button to select Cleaning and then press the OK button.

Once 2 cleanings are complete, print another test page. If the black grid is still missing, please perform an ink flush:

1. Please press the wrench and screwdriver button on your printer

2. Press the right arrow button to select Maintenance and press the OK

3. Ppress the right arrow button to select Ink Flush and then press the OK button

4. Check the displayed message and press OK button

5. Select Yes and then press OK button

6. Select Yes and then press OK button