topic Strange lines when printing in Desktop Inkjet Printers

Strange lines when printing

newprinter — Mon, 17 Feb 2020 04:31:20 GMT

I have a new Conon MG2500 printer and I am getting strange lines when I print in all colors, I have exercises a deep clean through my control panel in windows xp andhave printed some color squeres in primary colors and I have uploaded the results

Any suggestions please

https://ibb.co/gg2QMkw

https://ibb.co/bB8pCPF

https://ibb.co/MCyb6sN

https://ibb.co/fCx3t5v

https://ibb.co/mFq0fKF

Re: Strange lines when printing

shadowsports — Mon, 17 Feb 2020 16:01:52 GMT

Greetings,

While these links might be valid, I have no idea if they are safe.

If you had a few posts, I might consider it, but this is your very first post and topic.

Overly cautious, probably so, but in my line of work, I have to be.

If you want assistance, post examples of some of the images and we'll be happy to take a look.

Re: Strange lines when printing

Patrick — Mon, 17 Feb 2020 19:54:53 GMT

Hi newprinter,

One of the examples that was provided was of the nozzle check. Your nozzle check is not printing black and the colors are not printing correctly.

Please remove the ink cartridges from your printer and make sure that all of the tape/cellophane has been removed. Once checked, please reinsert the ink cartridges.

Next, please perform a printhead cleaning. To do this, please hold down the STOP button until the Error lamp flashes orange 2 times, then release it immediately.

After the cleaning is complete, please print another nozzle check. Please Please hold down the STOP button until the Error lamp flashes orange 1 time, then release it immediately.

Does your nozzle check look like the example below?

Re: Strange lines when printing

newprinter — Mon, 17 Feb 2020 22:20:54 GMT

Hi Patrick

I followed you instructions and I have scanned the paper I printed off, please see below

https://ibb.co/Nyw5pv9

Re: Strange lines when printing

Darius — Mon, 17 Feb 2020 23:31:50 GMT

Hi newprinter.

From the results provided, it looks like some of the Black and Cyan nozzles are still clogged. Try another cleaning or deep cleaning. If that doesn't provide satisfactory improvements, you'll want to replace the ink cartridges with fresh cartridges.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Re: Strange lines when printing

newprinter — Thu, 20 Feb 2020 00:34:07 GMT

Hi Patric

I have tried this claning method several times now using my pc to do the deep cleaning and still no better off.

Is there a manual way of cleaning them by hand?

You see I have been filling the cartrages up with bottled ink (only the once though) and injecting the ink into the conpartment