topic Re: MX922 won't print from inside a program but test page ok in Desktop Inkjet Printers

MX922 won't print from inside a program but test page ok

wooconley — Thu, 14 May 2020 20:00:56 GMT

My MX 922 has stopped printing from inside any program from any computer. If I open the printer properties and send a test page it works fine. From any of my computers.

It was ok until a few days ago. The first symptom was printing a couple inches then shooting the rest of the page out as blANK.

I've tried a unplugging and plugging back in, removing the ink cartridges putting them back in combined with unplugging and plugging back in. I've uninstalled the printer software, searched for updated drivers and installed any that popped up, etc.

I really liked this printer and would hate to replace it because newer printers seem inferior.

Re: MX922 won't print from inside a program but test page ok

wooconley — Thu, 14 May 2020 21:42:28 GMT

Update: now it's printing half the test page and spitting out the rest blank. Tried to reinstall again and the pc says printer not responding

Re: MX922 won't print from inside a program but test page ok

shadowsports — Fri, 15 May 2020 14:22:39 GMT

Greetings,

What I didn't see mentioned in your post. Have to done a standard or deep cleaning? This might help.

After that, if this behavior is happening from 2 or more computers, its safe to say the printer has a mechanical issue or has malfunctioned.

Your options are service or replacement.

Canon Support: 1 (800) 652-2666

Re: MX922 won't print from inside a program but test page ok

ArthurJ — Thu, 21 May 2020 20:09:07 GMT

Hi wooconley,

If you have not performed a cleaning, please click HERE for the steps. Once the cleaning is done, you will be asked to print a nozzle check. You can click the blue link in step 11 to compare your nozzle check to a sample one.

We look forward to hearing back from you and to see how the nozzle check came out.