bad results using the Canon Pixma ip 8720

JDH — Sat, 05 Jun 2021 17:30:09 GMT

I have been using Canon printer for many years was the Canon Pro 10 printer, The results were very very close to what I saw on my monitor, However with the 8720 printer the results are very bad, in order to make a half decent print I have to adjust the image on my monitor to be very light and very red. The resulting print is ok but not that good, I tried usin the Canon Easy photo print editor, the print was a little better but stil not that good, I am using Canon paper but i have used other brands with the same results. i have set the printer so that the printer decides color. Anyone have any ideas on how to get a decent print using this printer?

Thanks

Re: bad results using the Canon Pixma ip 8720

shadowsports — Sun, 06 Jun 2021 13:37:45 GMT

Greetings,

Monitor calibration is an important part of a workflow. If your monitor isn't calibrated, you really have no idea if what you see will be what your outputs look like.

It might also help us if you provide the following: information about your equipment and work flows.. .

Camera and its settings

Images are RAW or JPG

What program(s) you are printing from besides (Canon Easy Photo Print)

An image of your program settings

An example image of your output

topic Re: bad results using the Canon Pixma ip 8720 in Desktop Inkjet Printers

bad results using the Canon Pixma ip 8720

Re: bad results using the Canon Pixma ip 8720