Need helping setting up the fax machine

Mildred48 — Sat, 22 Dec 2012 02:42:54 GMT

Re: Need helping setting up the fax machine

Jason — Sun, 23 Dec 2012 04:20:42 GMT

Hello Mildred48. The community is eager to assist! To ensure the most accurate information is provided, we’ll need to know the model of the fax machine you are using. We look forward to hearing back from you!

Re: Need helping setting up the fax machine

shirltrot — Sat, 04 Oct 2014 20:57:49 GMT

My model is MX479

Re: Need helping setting up the fax machine

Ramona — Wed, 15 Oct 2014 05:07:55 GMT

Hi Mildred48,

You can use the Easy Setup feature of the unit to setup the fax. To do this, please follow the steps below:

Starting Easy Setup

(1) Press the button to display the Setup menu.

(2) Use the button to select Fax settings, then press the OK button.

(3) Use the button to select Easy setup, then press the OK button.

(4) Use the button to select Start setup, then press the OK button.

Easy setup starts up. Follow the on-screen instruction to complete the settings in accordance with the operating environment.

When "Connect your TEL line system to the device's LINE jack" is displayed, connect the machine to a telephone jack with the supplied telephone line cable, then press the OK button.

A basic connection method is shown in this figure. For other connection methods, refer to [Connecting the Telephone Line ].

When a message to prompt connection of a telephone or an answering machine is displayed. If you want to connect a telephone or an answering machine, remove the Cap, connect a telephone or an answering machine with a telephone line cable and press the OK button. If you do not want to connect a telephone or an answering machine, just press the OK button. Please do not use a telephone jack line duplexer.

When "Select line type" is displayed

If you want to connect to:

the telephone jack on the wall directly
a PBX extension line or an xDSL splitter

Use the button to select Telephone line, then press the OK button.

If you want to connect to:

an internet telephone
an xDSL modem
an ISDN line

Use the button to select IP telephone line, then press the OK button.

When "Telephone line type" is displayed

You can select Touch tone or Rotary pulse.

Use the button to select your Telephone line type, then press the OK button.

When "Ans. machine on tel." is displayed (in case fax and telephone are on the same line)

If you want to use an answering machine,

Use the button to select Use, then press the OK button.

If you do not want to use an answering machine,

Use the button to select Do not use, then press the OK button.

Hope this helps!

This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.

topic Re: Need helping setting up the fax machine in Desktop Inkjet Printers

Need helping setting up the fax machine

Re: Need helping setting up the fax machine

Re: Need helping setting up the fax machine

Re: Need helping setting up the fax machine