topic Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this? in Desktop Inkjet Printers

I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

glwun — Mon, 26 Nov 2012 16:01:08 GMT

Is there a fix for a canon pixma 620 that is giving me an error message 620. I reset the printer -- unplugged for 10+ minutes. That didn't work. Then took the print head out and cleaned and dried it. Replaced it .....that didn't work. Is there a home fix for this. If not I will be in the market for a good all in one printer...scanner etc. Any suggestions. Thanks glwun

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Michael — Wed, 28 Nov 2012 17:58:00 GMT

Hello glwun.

Please try the following to see if we can resolve your issue:

1. Open the cover of the printer.

2. Remove all ink tanks from the printer.

3. Lift up the gray locking lever on the side of the ink tank holder.

4. Gently remove the print head from the carriage unit.

5. Place the print head back in and lock the lever down.

6. Place all of the ink tanks back in the printer.

7. Close the cover and turn the printer off.

8. Unplug the power from the printer. Leave the power unplugged for about 5-10 minutes.

9. Plug the power back in and turn the printer on.

Unfortunately, if the error persists, please contact a technical support representative using the "Contact Us" link below for additional assistance.

This didn't answer your question or issue? Find more help at Contact Us.

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

kellzo — Mon, 21 Jan 2013 03:12:17 GMT

Hi there,

Unfortunately, I'm still struggling with the same error code after trying the steps recommended.

Is there no easy way out of this one? There's plenty of youtube videos where people smash their printers in response to this error, so I'm not too optimistic.

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Stephen — Thu, 24 Jan 2013 19:39:02 GMT

If the above solution didn't solve your B200 error, we'd recommend you contact us for further troubleshooting by clicking this LINK.

Thank you!!

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

jpechacek — Tue, 26 Feb 2013 23:09:52 GMT

I followed the recommended steps and still get the B200 error code.

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Naomi — Wed, 27 Feb 2013 02:41:52 GMT

Hi jpechacek!

If you're still running into the B200 error code, we recommend contacting our technical support agents. They'll be able to provide additional troubleshooting or service options, if needed. You can contact Canon Support through the link in Stephen's post, or find more help at Contact Us.

Hope this helps!

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

jumma — Fri, 15 Mar 2013 19:45:35 GMT

Some solution have been given here. Perhaps they worth a try

Canon Error B200

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

rmarien — Tue, 28 May 2013 18:58:10 GMT

Did not help. What else can I do?

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Naomi — Tue, 28 May 2013 22:01:28 GMT

Hello rmarien,

If you're still running into the B200 error code, you'll want to our technical support agents. If you've tried all the suggestions in this thread and our other B200 error discussions, service may be required. You can contact Canon Support through the link in Stephen's post, or find more help at Contact Us.

Thanks!

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

rmarien — Tue, 28 May 2013 23:43:57 GMT

Thanks. I have sent an email to support.

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

sallys2 — Sat, 06 Jul 2013 11:55:50 GMT

I have tried everything that you suggest. is there anything else I can do to get rid of the B200 error

Any suggestions gratefully received.

thanks.

sally2

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

jumma — Sat, 06 Jul 2013 13:58:48 GMT

You might try tips and solutions given in this article and comments:

Canon Error B200

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

jim5751 — Fri, 26 Jul 2013 18:17:14 GMT

from jim5751. I followed the steps listed to solve errprb200. When I had the print head out, I noticed it had black ink on the bottom of the print head so I wiped it off with a tissue and re-installed it into the printer. I reloaded the tanks turned off the printer etc. when I turned it back on I now have an error message that says

" UO52 "this type of print head is incorrect. Install the correct print head."

is it possible that that I changed the electrical ID for the print by wiping it off with a tissue. Is there any thing I can do to reverse this problem?

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

jim5751 — Fri, 26 Jul 2013 19:18:55 GMT

from jim5751. I followed the steps listed to solve error b200. When I had the print head out, I noticed it had black ink on the bottom of the print head so I wiped it off with a tissue and re-installed it into the printer. I reloaded the tanks turned off the printer etc. when I turned it back on I now have an error message that says

" UO52 "this type of print head is incorrect. Install the correct print head."

is it possible that that I changed the electrical ID for the print by wiping it off with a tissue. Is there any thing I can do to reverse this problem

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Rdehorn — Fri, 16 Aug 2013 01:22:29 GMT

I called tech support after getting the b200 error. My call was handled very well but they pretty much told the printer is dust and sent me over to the canon loyalty department for a small discount on a replacement. Not a very good outcome for a clear defect in a printer that is not very old.

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Jelmer_M — Sat, 21 Sep 2013 16:20:35 GMT

Hello,

I know the last reply is a month old, but I have to say this, because this site is the first hit you find on the keywords: "Canon mp620 B200 error" and I have the solution!

My solution was VERY simple, but I don't know if it works by other printers.

Solution:

Switch off the printer.
Open the cover of the printer.

Switch the printer on with the cover open.
When your display shows: "Cover is open." Close the cover.
Then your display shows: "Processing... Please wait momentarily"
Then your display shows the start menu.

It worked for me! I don't know if it works by other printers!

Sorry for my bad English, I'am 15 and writing English is not my best point.

I hope it works for you too.

JelmerM

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

riverboatmike — Sun, 22 Sep 2013 22:09:26 GMT

Jeimer_M - Yes your solution worked for me first time. Thanks for the tip.

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

riverboatmike — Sun, 22 Sep 2013 22:26:26 GMT

Oops - no it didn't - the error came straight back next time I tried to print.

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

badolina — Wed, 09 Oct 2013 12:50:01 GMT

Thanks, JelmerM! Worked like magic, and your English is great 🙂

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Wilhelm — Wed, 12 Mar 2014 17:10:05 GMT

I visited Canon Solution Menu EX, found my printer driver needed an update. That solved the problem.