topic Re: Paper tray for Pixima MG5420 is too small? in Desktop Inkjet Printers

Paper tray for Pixima MG5420 is too small?

Me2 — Wed, 29 Jan 2014 05:28:32 GMT

Help! I'm sure hoping it is me and not the printer. We tried to load the special MP-101 paper into the lower printer tray as directed but it doesn't fit even though I opened the guides up all the way. Normal paper doesn't fit either. What the heck! How do we use our printer?

On a side note, not happy that one of the print cartridges was missing. Fortunately we'd ordered an extra set.

Re: Paper tray for Pixima MG5420 is too small?

n2baja — Fri, 14 Feb 2014 04:47:34 GMT

Hello,

Were you able to figure out how to extend the paper tray to accept larger sized paper? I'm having the same issue and can't find help anywhere.

Thanks!

Re: Paper tray for Pixima MG5420 is too small?

Ramona — Sat, 15 Mar 2014 19:50:09 GMT

Hi Me2,

The machine has two paper sources for feeding paper -- the cassette (upper) and cassette (lower). Please ensure that the lower cassette tray was being used instead of the upper cassette tray. For more information and illustrations on loading paper in the printer, please click on the the link below:

Loading Paper in the PIXMA MG5420

Hope this helps!

This didn't answer your question or issue? Find more help at Contact Us.

Re: Paper tray for Pixima MG5420 is too small?

Me2 — Sun, 16 Mar 2014 16:31:19 GMT

Figured out that there are three sections, not two, and that one is the paper out-feed. Also found the lost ink cartridge, but now it won't grab just one paper each time. It can grab anywhere from 1-3 pieces at a time, usually 2-3. This is what the printer we are replacing was starting to do (in fact this one is MUCH worse), making us very unhappy indeed. I sure hope there is an answer to this one. At this point we would return it but it took us so long to get it set-up and in use that we are afraid we are stuck with a lemon.

Also unhappy that it doesn't hold much paper period, but doubt there is an answer to that one.

Re: Paper tray for Pixima MG5420 is too small?

Ramona — Thu, 10 Apr 2014 22:14:00 GMT

Hi Me2,

Performing a roller cleaning on the printer may resolve the issue you are experiencing. To do this, please follow the steps located at the link below:

PIXMA MG5420 - Performing a Roller Cleaning

If you still experience difficulty after performing at least three roller cleanings on the printer, please Contact Us for further assistance.