https://community.usa.canon.com/t5/Camera-Software/Camera-Connect-with-SX530hs/m-p/231061#M3423 <P>Trying to use this app to control an SX530hs that is mounted above a photo table.&nbsp;Camera is in Manual and when used on it's own, photos look fine...just not practical to hang myself from the ceiling to run the camera. When I try using the camera connect app, I have no access to the camera settings through the app (I see the option, just not available) and my white table can be either white or dull beige depending on the color of the item on the table. I'm guessing the app defaults to a different program mode, but I'm at a loss as to how I can control that...if at all.</P><P>&nbsp;</P><P>Any help would be appreciated,</P><P>Bob</P> Tue, 23 Jan 2018 03:40:22 GMT Wormmaker 2018-01-23T03:40:22Z https://community.usa.canon.com/t5/Camera-Software/Camera-Connect-with-SX530hs/m-p/231061#M3423 <P>Trying to use this app to control an SX530hs that is mounted above a photo table.&nbsp;Camera is in Manual and when used on it's own, photos look fine...just not practical to hang myself from the ceiling to run the camera. When I try using the camera connect app, I have no access to the camera settings through the app (I see the option, just not available) and my white table can be either white or dull beige depending on the color of the item on the table. I'm guessing the app defaults to a different program mode, but I'm at a loss as to how I can control that...if at all.</P><P>&nbsp;</P><P>Any help would be appreciated,</P><P>Bob</P> Tue, 23 Jan 2018 03:40:22 GMT https://community.usa.canon.com/t5/Camera-Software/Camera-Connect-with-SX530hs/m-p/231061#M3423 Wormmaker 2018-01-23T03:40:22Z