topic Re: R5 MK2 with Canon Connect App - totaly unreliable geotagging !! in Camera Software

EOS R5 MarK II with Canon Connect App - unreliable geotagging !!

Hobby-Snapper — Wed, 01 Jan 2025 16:45:26 GMT

A few weeks ago, I finaly took the plunge and upgraded (??) from my 5D MK iv to an R5 MK 2.

I was reluctant to lose the built in GPS in the 5D but thought I could get by with using the Canon Connect app on my Android phone to geotag my photos on the R5 MK2.

Unfortunately, this has not been the case. Very disapointed to report that no matter what I do, the Canon Connect app in combination with the R5 randomly fails to geotag properly - sometimes no data at all and sometimes just very inacurate.

Does anybody know of any alternatives or fixes ( I believe the dedicated GPS hotshoe unit is discontinued now )?

Many thanks

Re: R5 MK2 with Canon Connect App - totaly unreliable geotagging !!

sturmen — Thu, 26 Dec 2024 13:55:22 GMT

Yes, the dedicated hotshoe (Canon GP-E2) is discontinued, but you can still find them on the secondhand market. You'll also need the adapter (Canon AD-E1) but I can confirm that if you have both, it works with the R5 II.

Re: R5 MK2 with Canon Connect App - totaly unreliable geotagging !!

Hobby-Snapper — Thu, 26 Dec 2024 14:15:29 GMT

Thanks for the confirmation that the GP-E2 works well on the R5 II.

I'm hoping that Canon will launch a new GPS unit that will work directly with the camera rather than have to buy a second hand unit and an adaptor - fingers crossed that Canon has something new in the pipeline ???

🤔

Re: R5 MK2 with Canon Connect App - totaly unreliable geotagging !!

Hobby-Snapper — Thu, 26 Dec 2024 14:31:29 GMT

Just came across this, posted by Canon France 1 month ago !!

Response from Canon France:

a month ago

Canon Customer Service

Dear Customer, We thank you for sharing your opinion and apologize for the inconvenience. The Canon GP-E2 GPS Receiver is still marketed as well as the Canon AD-E1 Multi-Shoe Adapter. The products are only out of stock. If necessary, you can contact us: - By Tel: +33 1 7048 0500 - By email at store.fr@cc.canon-europe.com - By filling out the following contact form: https://www.canon.fr/support/consumer_products/contact_support/ Thank you for choosing Canon.

Re: R5 MK2 with Canon Connect App - totaly unreliable geotagging !!

Hobby-Snapper — Thu, 26 Dec 2024 14:43:23 GMT

Also, just found another article that suggests the GP-E2 will work directly on the R5-MK2 without the Multi-Shoe Adapter:

See: https://www.fredmiranda.com/forum/topic/1865819/0 entry by stanj

QUOTE: The GP-E2 works just fine in the R5m2, without an adapter, locks nicely in place (with lever). Was the 2nd thing I tried.

Re: R5 MK2 with Canon Connect App - totaly unreliable geotagging !!

Hobby-Snapper — Fri, 27 Dec 2024 11:10:49 GMT

The plot thickens !!!! Extract from the R5 MK2 manual page 74:

GPS Receiver GP-E2 requires adapter AD-E1 sold separately !!!

Re: R5 MK2 with Canon Connect App - totaly unreliable geotagging !!

sturmen — Tue, 31 Dec 2024 20:07:52 GMT

Confirmed: the camera recognizes the GP-E2 both with and without the AD-E1 adapter. I tested on the R5m2 and the R7.

Re: R5 MK2 with Canon Connect App - totaly unreliable geotagging !!

Hobby-Snapper — Wed, 01 Jan 2025 16:42:04 GMT

Good news, Many Thanks

Re: R5 MK2 with Canon Connect App - totaly unreliable geotagging !!

Waddizzle — Wed, 01 Jan 2025 23:17:22 GMT

“ GPS Receiver GP-E2 requires adapter AD-E1 sold separately !!! “

You need to use it. Microsoft-SD cards seem to work just fine until they don’t.

I know that the adapter helps preserve the weather sealing and protects the extra pin connectors. They seem to always be in short supply. The cost is negligible.