https://community.usa.canon.com/t5/Camcorders/Vixia-HF50-quot-Monitor-while-Out-quot-connection-not/m-p/125607#M4706 <P>I have the HF50, win 7 home edition laptop and linksys wrt54gs2 v1 and trying to connect with an iphone using the "monitor while out" function.</P><P>- streaming from camera to iphone works fine, while in recording mode</P><P>- when in play mode connecting to access point works, and I can find the camera in the networks of my laptop</P><P>- When in streaming mode and trying to connect with "monitor while out", I get an error message that I have to change the port settings.</P><P>- the port is set to 80, and I entered a password (into the camera)</P><P>- I ran the checking tool that is supposed to check the system capability to use the "monitor while out" function.</P><P>- 1st check says system is not properly configured, router does not support "UPnP. I checked, the router is in fact capable of UPnP and this function is enabled</P><P>- Ran the tool again and not its saying router does not allow port mapping. I think it does, because I have some ports open for the xbox. Otherwise, I don't have much of a clue....</P><P>- I opened port 80 entering the IP of my computer and the checking tool says nothing found that would prevent me from using .....</P><P>- I opened port 80 to the IP address of the camera, however the camera won't connect allays the same error.</P><P>- I played with the settings in the router, but no success.</P><P>- running the checking tool seems to give random results between router does not provide UPnP, no port mapping and no issue found.</P><P>&nbsp;</P><P>I suspect the issue is in the router, but I don't have any idea what to try out next.</P><P>&nbsp;</P><P>Any help is appreciated.</P> Mon, 17 Nov 2014 16:22:21 GMT Theo16505 2014-11-17T16:22:21Z https://community.usa.canon.com/t5/Camcorders/Vixia-HF50-quot-Monitor-while-Out-quot-connection-not/m-p/125607#M4706 <P>I have the HF50, win 7 home edition laptop and linksys wrt54gs2 v1 and trying to connect with an iphone using the "monitor while out" function.</P><P>- streaming from camera to iphone works fine, while in recording mode</P><P>- when in play mode connecting to access point works, and I can find the camera in the networks of my laptop</P><P>- When in streaming mode and trying to connect with "monitor while out", I get an error message that I have to change the port settings.</P><P>- the port is set to 80, and I entered a password (into the camera)</P><P>- I ran the checking tool that is supposed to check the system capability to use the "monitor while out" function.</P><P>- 1st check says system is not properly configured, router does not support "UPnP. I checked, the router is in fact capable of UPnP and this function is enabled</P><P>- Ran the tool again and not its saying router does not allow port mapping. I think it does, because I have some ports open for the xbox. Otherwise, I don't have much of a clue....</P><P>- I opened port 80 entering the IP of my computer and the checking tool says nothing found that would prevent me from using .....</P><P>- I opened port 80 to the IP address of the camera, however the camera won't connect allays the same error.</P><P>- I played with the settings in the router, but no success.</P><P>- running the checking tool seems to give random results between router does not provide UPnP, no port mapping and no issue found.</P><P>&nbsp;</P><P>I suspect the issue is in the router, but I don't have any idea what to try out next.</P><P>&nbsp;</P><P>Any help is appreciated.</P> Mon, 17 Nov 2014 16:22:21 GMT https://community.usa.canon.com/t5/Camcorders/Vixia-HF50-quot-Monitor-while-Out-quot-connection-not/m-p/125607#M4706 Theo16505 2014-11-17T16:22:21Z