How do I make fader settings remain in HF R30?

immersifi — Mon, 04 Mar 2013 21:58:17 GMT

Can I have a set of 'customized' parameters (fade, stabilization etc) that I can have the camcorder default to, or do I have to invoke fade every time I re-open the display panel?

Re: How do I make fader settings remain in HF R30?

Richard — Fri, 08 Mar 2013 04:06:39 GMT

Hi Immersifi,

Here's how the faders work:

The camcorder offers two professional looking transition effects to fade-in or fade-out scenes. You have the option to activate the fader only one time or every time you start or stop recording.

IMPORTANT
The screens and settings that appear may differ depending on the model you are using.
When the [Camera Mode] is set to [ ] (Auto), this setting cannot be made. Please make the setting in either [
] (Manual) or [ ] (Cinema).

1. Touch [ ].

2.
Drag your finger up and down to display the rest of the panel, and then
touch [Faders].

3. Touch any of the available options.

Touch [ (Off)] to turn faders off.

The different effects are as shown below.

Fade Trigger

Wipe

4. Touch [ ].

5. Press ) to start recording with a fade in. Press ) to fade out and pause the recording.

NOTE
When you apply a fader, not only the picture but also the sound will fade in or out.
Faders cannot be used in the following cases:
- While using the [Old Movies] cinema-look filter in mode.
- When recording scenes with decorations.
- When recording video snapshot scenes.
- While pre-recording is activated.
You can select whether to fade to/from a black screen or a white screen with the [Fader Setting] setting.

topic How do I make fader settings remain in HF R30? in Camcorders

How do I make fader settings remain in HF R30?

Re: How do I make fader settings remain in HF R30?