<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Re: XA20 Zooming Out Automatically in Camcorders</title>
    <link>https://community.usa.canon.com/t5/Camcorders/XA20-Zooming-Out-Automatically/m-p/278484#M2306</link>
    <description>&lt;P&gt;Hi my XA30 had this issue, on researching I&amp;nbsp; found&amp;nbsp; out the line has an issue where they did not put the switch transducer (the sensor) in a sealed housing.&amp;nbsp; (I run a nano-fabrication clean room).&amp;nbsp; Try this.&amp;nbsp; Used compressed air (a can with the small plastic tube to aim the air) into the switch to blow out dust.&amp;nbsp; Alternatively, use a remote zoom switch (they cost between $60 and $200).&amp;nbsp; Finally, if you are very careful, you can take off 3 body panels and clean the switch from the bottom.&amp;nbsp; Hope this helps.&lt;/P&gt;</description>
    <pubDate>Sat, 03 Aug 2019 00:58:04 GMT</pubDate>
    <dc:creator>ContactJim</dc:creator>
    <dc:date>2019-08-03T00:58:04Z</dc:date>
    <item>
      <title>XA20 Zooming Out Automatically</title>
      <link>https://community.usa.canon.com/t5/Camcorders/XA20-Zooming-Out-Automatically/m-p/246103#M2305</link>
      <description>&lt;P&gt;I've read through a numbrer of other posts here for different camera with seemingly no solution. This "appears" to be a software, not a mechanical issue as the unit will zoom out while resting, nobody at the controls. I didn't see anything address it in the firmware update (last one in 2016). Any help or links to a solution would be greatly appreciated.&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Tue, 19 Jun 2018 15:57:49 GMT</pubDate>
      <guid>https://community.usa.canon.com/t5/Camcorders/XA20-Zooming-Out-Automatically/m-p/246103#M2305</guid>
      <dc:creator>ctdennis11</dc:creator>
      <dc:date>2018-06-19T15:57:49Z</dc:date>
    </item>
    <item>
      <title>Re: XA20 Zooming Out Automatically</title>
      <link>https://community.usa.canon.com/t5/Camcorders/XA20-Zooming-Out-Automatically/m-p/278484#M2306</link>
      <description>&lt;P&gt;Hi my XA30 had this issue, on researching I&amp;nbsp; found&amp;nbsp; out the line has an issue where they did not put the switch transducer (the sensor) in a sealed housing.&amp;nbsp; (I run a nano-fabrication clean room).&amp;nbsp; Try this.&amp;nbsp; Used compressed air (a can with the small plastic tube to aim the air) into the switch to blow out dust.&amp;nbsp; Alternatively, use a remote zoom switch (they cost between $60 and $200).&amp;nbsp; Finally, if you are very careful, you can take off 3 body panels and clean the switch from the bottom.&amp;nbsp; Hope this helps.&lt;/P&gt;</description>
      <pubDate>Sat, 03 Aug 2019 00:58:04 GMT</pubDate>
      <guid>https://community.usa.canon.com/t5/Camcorders/XA20-Zooming-Out-Automatically/m-p/278484#M2306</guid>
      <dc:creator>ContactJim</dc:creator>
      <dc:date>2019-08-03T00:58:04Z</dc:date>
    </item>
  </channel>
</rss>

