08-20-2017 03:58 PM
hi, I am new here and need some help, I did a system restore on my laptop and then wanted to re-load the printer sofwear, Pixma mx452, I put in the cd and could not get it to apply the softwear to the computer. I tried to remove the cd but the draw will not open, tried every method short of taking the pc apart. So my question for now is, can I download the set up information online. thanks in advance for any help.
10-11-2017 02:24 PM
Hi godfathergo3,
The driver and software for your PIXMA MX452 are available for download from Canon's web site. To access the downloads, please use the following link:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.