Canon Community Canon Community
 


Reply
New Contributor
Posts: 1
Registered: ‎01-29-2017

Re: The printer could not be detected on the network message during Canon PIXMA MX922 installation

[ Edited ]

Have tried all of the following help within this post and still will not detect printer.

We did have everything working with USB to laptop and had lost the ability to use wirelessly.

Reinstalled drivers and now have got no connection.

Windows 7


========================================
Network Information
========================================

----------------------------------------
General Info.
----------------------------------------
(01)Date. . . . . . . . . . . . . . . . . : 2017/Jan/29 09:44:04
(02)Model . . . . . . . . . . . . . . . . : Canon MX920 series Printer
(03)Printer . . . . . . . . . . . . . : USB Printer
(04)BJNP Port Name. . . . . . . . : CNBJNP_F80D6039707F(192.168.0.100) Wireless
(05)Scanner . . . . . . . . . . . . . : Canon MX920 series Network
(07)Fax . . . . . . . . . . . . . . . : USB FAX
(08)BJNPFAX Port Name . . . . . . : CNBJNPFAX_F80D6039707F(192.168.0.100) Wireless

(09)BJNP Port Monitor Version . . . . . . : 3.2.0.40

----------------------------------------
Application Info.
----------------------------------------
(11)Port Name . . . . . . . . . . . . . . : USB002
(12)BJNP Port Name. . . . . . . . . . . . : CNBJNP_F80D6039707F(192.168.0.100) Wireless
(13)BJNP Communication Module Version . . : 3.2.0.40
(14)Application Name. . . . . . . . . . . : Canon IJ Driver Installer; Set Printer IP Address(Wireless)
(15)Application Version . . . . . . . . . : 2.3.0.50
(16)Printer . . . . . . . . . . . . . . . : USB Printer

----------------------------------------
NIC Info.
----------------------------------------
(21)Printer . . . . . . . . . . . . . . . : Canon MX920 series Printer
(22)Firmware Version. . . . . . . . . . . : 3.011

Wireless LAN
(23)Wireless LAN Enabled. . . . . : YES
(24)Standard. . . . . . . . . . . : 802.11n
(25)MAC Address . . . . . . . . . : F8-0D-60-39-70-7F

(26)Network Type. . . . . . . . . : Infrastructure
(27)SSID. . . . . . . . . . . . . : xxxxxxxx-WiFi
(29)Encryption ON . . . . . . . . : YES
(30)Encryption Type . . . . . . . : AES
(31)Authentication. . . . . . . . : WPA2-PSK
(32)Attached Information. . . . . : 8 character Passphrase

(33)Link Status . . . . . . . . . : Active
(34)Signal Strength . . . . . . . : 64%
(35)Link Quality. . . . . . . . . : 70%

TCP/IP
(36)Mode. . . . . . . . . . . . . : Manual
(37)IP Address. . . . . . . . . . : 192.168.0.100
(38)Subnet Mask . . . . . . . . . : 255.255.255.0
(39)Default Gateway . . . . . . . : 192.168.0.1

(47)Admin Password ON . . . . . . . . . . : NO
Printer Access Control
(48)MAC Address Enable. . . . . . : NO
(49)IP Address Enable . . . . . . : NO
(50)Device Status . . . . . . . . . . . . : Available
Printer User Name
(51)Wireless Name . . . . . . . . :

----------------------------------------
PC Info.
----------------------------------------
(61)SSID Info.
Wireless adapter Name . . . . . . . . . . : Qualcomm Atheros QCA9565 802.11b/g/n WiFi Adapter
SSID. . . . . . . . . . . . . . . . . : xxxxxxxx-WiFi

Wireless adapter Name . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
SSID. . . . . . . . . . . . . . . . . : N/A

(62)IP Configuration Info.
Windows IP Configuration

Host Name . . . . . . . . . . . . : xxxxxxxxxxxx
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : 

 

 

Product Expert
Posts: 1,570
Registered: ‎07-28-2014

Re: The printer could not be detected on the network message during Canon PIXMA MX922 installation

Hi Acebrew,

 

It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:

http://Canon.us/ContactLI

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
New Contributor
Posts: 3
Registered: ‎07-11-2017

Re: The printer could not be detected on the network message during Canon PIXMA MX922 installation

This did not work for me. I have 2 other computers that communicate fine with this printer. Any other thoughts?

New Contributor
Posts: 3
Registered: ‎07-11-2017

Re: The printer could not be detected on the network message during Canon PIXMA MX922 installation

[ Edited ]

This describes my problem to a T.

Pixma MX922. using win 10 /64. ver 1607.

I have applied every suggested "fix" on this chain of posts. Nuthin!

 

I have two other computers communicating perfectly with this printer.

 

Why Why Why ????  please advise.

New Contributor
Posts: 1
Registered: ‎07-17-2017

Re: The printer could not be detected on the network message during Canon PIXMA MX922 installation

This article was very helpful. After executing the steps mentioned my printer connected seamlessly.  Canon should include these helpful solutions in their printed directions that come with the printer. This experience left me with a negative opinion of Canon. I'm so frustrated and so mad at Canon. I wasted so much time.

Highlighted
New Contributor
Posts: 1
Registered: ‎01-04-2018

Re: The printer could not be detected on the network message during Canon PIXMA MX922 installation

Thanks man., Saved me a whole bunch of time.

In a weird way this worked instantly and automatically GoogleCloud Print where it was failing before seemed to fire off and everything appeared as it should

Now printing, after 4 hrs
New Contributor
Posts: 1
Registered: ‎02-10-2018

Re: The printer could not be detected on the network message during Canon PIXMA MX922 installation

I had the same problem.  In my case I had an IPV4 address registered on the printer.  I disabled IPV6 but it didn't help, still got "Printer Not Detected"

 

Finally after much trial and error I found a setting that I had disabled in the printer called "Enable WSD Scan from this Device".  This was in the WSD settings.  When I enabled this setting, then the setup wizard was able to find the printer

New Contributor
Posts: 1
Registered: ‎03-21-2018

Re: The printer could not be detected on the network message during Canon PIXMA MX922 installation

I've tried this solution and it did not work for me.  I've been using my MX922 for about 2 years now and all of a sudden it stopped working and I can't detect it in my network.  I am running Win10 64 bit.

 

Any help would be greatly appreciated.

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement