Canon Community Canon Community
 


Reply
New Contributor
Posts: 1
Registered: ‎12-13-2012

PIXMA MX432. I can't print now. I only get the "please wait for a while.

I installed a new ink cartridge in my PIXMA MX432. I can make copies just fine, but I can't print. I only get the "please wait for a while" message.

Product Expert
Posts: 2,411
Registered: ‎10-16-2012

Re: PIXMA MX432. I can't print now. I only get the "please wait for a while.

Hello TomClark.

 

For testing purposes, please turn the printer off and back on.  Then restart your computer.  Once this has been done, try printing again. 

 

If the error persists, please contact our support group using the "Contact Us" link below for additional assistance.

 

This didn't answer your question or issue? Find more help at Contact Us.

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
New Contributor
Posts: 1
Registered: ‎04-09-2015

Re: PIXMA MX432. I can't print now. I only get the "please wait for a while.

This worked. Thanks!

BTW occurred after replacing an ink cartrage
New Contributor
Posts: 2
Registered: ‎11-04-2017

Re: PIXMA MX432. I can't print now. I only get the "please wait for a while.

 This 'please wait a while' message was occuring after I changed the cartrages, then tryuing to print something through the wifi.  I discovered that my WIFI was DISCONNECTED on the printer. 

Highlighted
New Contributor
Posts: 2
Registered: ‎11-04-2017

Re: PIXMA MX432. I can't print now. I only get the "please wait for a while.

ALSO DO A PRINT HEAD ALIGHNEMT AFTER NEW CARTRAGES.

Product Expert
Posts: 130
Registered: ‎01-20-2016

Re: PIXMA MX432. I can't print now. I only get the "please wait for a while.

Hi dept911,

 

Let's start by resetting the unit.

 

  1. If the paper output tray is closed, open it.

  2. Turn the printer off.

  3. When the printer is completely off (no lights, screen is blank) unplug the unit.

  4. Press the power button 4-5 times.

  5. Leave the printer off for at least 5 minutes.

  6. Plug the printer in and turn it on.

Once completed, restart the computer.

 

This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement