01-22-2017 04:15 AM
Hi,
After I changed from ADSL to Fibre, I have been unable to use my Pixma IP7240 wirelessly. It works fine via USB, but when I "Add printer" the printer doesn't show up. If I hold the blue wireless button on the printer until it starts flashing and then press the WPS button on my router, I get a message asking for the WPS Pin for the IP7240 - haven't a clue where to find that!
Please help 😞
01-22-2017 08:54 AM
Hi Estelleh,
The PIXMA iP7240 is not supported by Canon USA, as it is sold overseas. For assistance with connecting your PIXMA iP7240 to your computer for wireless use, please contact Canon UK for further assistance.
To contact Canon UK, please use the following links:
(for email support) http://www.canon.co.uk/support/consumer_products/contact_support/
(for telephone support) http://www.canon.co.uk/support/consumer_products/telephone_numbers/
02-08-2017 06:42 AM
Press and hold resume/cancel button you will see power light is blinking every 1-2seconds.
Count to 6 then release the resume/cancel button.
Printer will be print a network log. You can see your WPS key there
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.