07-26-2016 12:03 PM
I have Macbook pro and Apple Mac, plus Canon 5300. I have tried to connect both computers to Pixma 5300 via wifi, but cannot get both computers set at the same time - wifi drops then when I identify the printer over wifi the scanner software does not load so I cannot operate scanner from MacBook Pro and Apple Mac.
I tried linking MacBook Pro via LAN connection which worked but then cut off the Apple Mac. Am I missing something here?
07-28-2016 09:19 AM
Hello.
Troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.